Detailed Evaluation & Buyer Recommendation
Weld-Craft 1648 Stick 2011 vs Weld-Craft 1652 DD Econo 2012 — Same Brand, Different Boat
Matching a flat Weld-Craft 1648 Stick 2011 against a modified vee Weld-Craft 1652 DD Econo 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
The power gap is worth calling out. Rated to 80 hp, the Weld-Craft 1652 DD Econo 2012 has a 40-hp advantage over the Weld-Craft 1648 Stick 2011's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Bottom line: Performance buyers should lean toward the Weld-Craft 1652 DD Econo 2012 and its 80-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft 1648 Stick 2011 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 Stick
Model1652 DD Econo
Model Year2011
Model Year2012
Measurements / Dimensions
Beam - Meters1.78
Beam - Meters1.88
Beam - Inches7
Beam - Inches74
Width [transom] - Detail48 in
Width [transom] - Detail52 in. bottom
Height - Detail22 in. side
Height - Detail22 in. side
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet16
Length - Feet16
Weight - Detailnot available
Weight - Detail700 lbs
Weight - kgnot available
Weight - kg317.51
Weight - lbs.not available
Weight - lbs.7
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in
Hull thickness0.100 in
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Drive typeOutboard
Drive typeOutboard
Horsepower40 hp stick
Horsepower80 hp
Engine modelnot available
Engine model22 in. shaft
Operational Info
Maximum capacitynot available
Maximum capacity1,148 lbs
Maximum peoplenot available
Maximum people5
Weld-Craft 1648 Stick 2011 vs Weld-Craft 1652 DD Econo 2012 — Common Questions
Which is the larger boat — the Weld-Craft 1648 Stick 2011 or the Weld-Craft 1652 DD Econo 2012?
The Weld-Craft 1652 DD Econo 2012 is the longer of the two at 16,0 feet overall. The Weld-Craft 1648 Stick 2011 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1652 DD Econo 2012 is rated to a maximum of 80 hp, giving it the larger power ceiling. The Weld-Craft 1648 Stick 2011 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft 1652 DD Econo 2012 carry?
The Weld-Craft 1652 DD Econo 2012 has an official capacity rating of 5 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1652 DD Econo 2012 measures 74" wide, compared to 7" for the Weld-Craft 1648 Stick 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 Stick 2011 and Weld-Craft 1652 DD Econo 2012 from the same manufacturer?
Yes — both the Weld-Craft 1648 Stick 2011 and the Weld-Craft 1652 DD Econo 2012 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.