Weld-Craft 1648 Camo Duck Boat 2011 boat specs
Weld-Craft
Weld-Craft 1648 Camo Duck Boat 2011
2011
View full specs →
VS
Weld-Craft UVCDS 70 (20 ft.) 2010 boat specs
Weld-Craft
Weld-Craft UVCDS 70 (20 ft.) 2010
2010
View full specs →

Weld-Craft 1648 Camo Duck Boat 2011 vs Weld-Craft UVCDS 70 (20 ft.) 2010: Which Flat-Bottom Boat Fits Your Needs?

Both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weld-Craft UVCDS 70 (20 ft.) 2010 are flat-bottom designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Both boats share a closely matched power ceiling - 35 hp for the Weld-Craft 1648 Camo Duck Boat 2011 and 40 hp for the Weld-Craft UVCDS 70 (20 ft.) 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Bottom line: The Weld-Craft UVCDS 70 (20 ft.) 2010 at 20,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1648 Camo Duck Boat 2011 at 16,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 Camo Duck Boat
ModelUVCDS 70 (20 ft.)
Model Year2011
Model Year2010
Measurements / Dimensions
Beam74 in.
Beam94 in.
Beam - Meters1.88
Beam - Meters2.39
Beam - Inches74
Beam - Inches94
Width [transom] - Detail49 in.
Width [transom] - Detailnot available
Height - Detail22 in. side
Height - DetailSide: 26 in.
Height - Meters0.56
Height - Meters0.66
Height - Inches22
Height - Inches26
Length - Feet16
Length - Feet20
Length overall - Detailnot available
Length overall - Detail20 ft. 0 in.
Length overall - Metersnot available
Length overall - Meters6.1
Length overall - Inchesnot available
Length overall - Inches240
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.1
Hull thicknessnot available
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Horsepower35 hp manual
Horsepowernot available
Engine maxnot available
Engine max40 hp (manual)

Weld-Craft 1648 Camo Duck Boat 2011 vs Weld-Craft UVCDS 70 (20 ft.) 2010 - Common Questions

Which is the larger boat - the Weld-Craft 1648 Camo Duck Boat 2011 or the Weld-Craft UVCDS 70 (20 ft.) 2010?
The Weld-Craft UVCDS 70 (20 ft.) 2010 is the longer of the two at 20,0 feet overall. The Weld-Craft 1648 Camo Duck Boat 2011 comes in at 16,0 feet, making it roughly 4,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
How many passengers can the Weld-Craft UVCDS 70 (20 ft.) 2010 carry?
The Weld-Craft UVCDS 70 (20 ft.) 2010 has an official capacity rating of 6 people. Capacity data wasn't available for the other model in this comparison - verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft UVCDS 70 (20 ft.) 2010 measures 94" wide, compared to 74" for the Weld-Craft 1648 Camo Duck Boat 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 Camo Duck Boat 2011 and Weld-Craft UVCDS 70 (20 ft.) 2010 from the same manufacturer?
Yes - both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weld-Craft UVCDS 70 (20 ft.) 2010 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.