Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine Ocean King 220 2006 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1648 Camo Duck Boat 2011 or the Weldcraft Marine Ocean King 220 2006?

The Weldcraft Marine Ocean King 220 2006 is the longer of the two at 22,0 feet overall. The Weld-Craft 1648 Camo Duck Boat 2011 comes in at 16,0 feet, making it roughly 6,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: What is the maximum horsepower rating for these boats?

The Weld-Craft 1648 Camo Duck Boat 2011 has a documented max rating of 35 hp. Engine specifications for the Weldcraft Marine Ocean King 220 2006 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many passengers can the Weldcraft Marine Ocean King 220 2006 carry?

The Weldcraft Marine Ocean King 220 2006 has an official capacity rating of 6 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine Ocean King 220 2006 measures 102" wide, compared to 74" for the Weld-Craft 1648 Camo Duck Boat 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 1648 Camo Duck Boat 2011 and Weldcraft Marine Ocean King 220 2006 from the same manufacturer?

Yes — both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weldcraft Marine Ocean King 220 2006 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine Ocean King 220 2006

Weld-Craft

Weld-Craft 1648 Camo Duck Boat 2011

2011

View full specs →

Weld-Craft

Weldcraft Marine Ocean King 220 2006

2006

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine Ocean King 220 2006 — Same Brand, Different Boat

The Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine Ocean King 220 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Weld-Craft 1648 Camo Duck Boat 2011 carries a rated maximum of 35 hp. Engine data for the Weldcraft Marine Ocean King 220 2006 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Bottom line: The Weldcraft Marine Ocean King 220 2006 at 22,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1648 Camo Duck Boat 2011 at 16,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

Model1648 Camo Duck Boat

ModelOcean King 22

Model Year2011

Model Year2006

Measurements / Dimensions

Beam74 in

Beam102 in

Beam - Meters1.88

Beam - Meters2.59

Beam - Inches74

Beam - Inches102

Width [transom] - Detail49 in

Width [transom] - Detailnot available

Height - Detail22 in. side

Height - Detailnot available

Height - Meters0.56

Height - Metersnot available

Height - Inches22

Height - Inchesnot available

Length - Feet16

Length - Feet22

Deadrisenot available

Deadrise28℃ bow variable to 18℃ at transom

Weight - Detailnot available

Weight - Detail3,075 lbs

Weight - kgnot available

Weight - kg1394.8

Weight - lbs.not available

Weight - lbs.3075

Length overall - Detailnot available

Length overall - Detail22 ft. 0 in

Length overall - Metersnot available

Length overall - Meters6.71

Length overall - Inchesnot available

Length overall - Inches264

Body / Hull

Hull materialAluminum

Hull materialnot available

Hull thickness0.1

Hull thicknessnot available

Hull typeFlat

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Horsepower35 hp manual

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail90 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters340.69

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal9

Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine Ocean King 220 2006 — Common Questions

Which is the larger boat — the Weld-Craft 1648 Camo Duck Boat 2011 or the Weldcraft Marine Ocean King 220 2006?

The Weldcraft Marine Ocean King 220 2006 is the longer of the two at 22,0 feet overall. The Weld-Craft 1648 Camo Duck Boat 2011 comes in at 16,0 feet, making it roughly 6,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

What is the maximum horsepower rating for these boats?

The Weld-Craft 1648 Camo Duck Boat 2011 has a documented max rating of 35 hp. Engine specifications for the Weldcraft Marine Ocean King 220 2006 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many passengers can the Weldcraft Marine Ocean King 220 2006 carry?

The Weldcraft Marine Ocean King 220 2006 has an official capacity rating of 6 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine Ocean King 220 2006 measures 102" wide, compared to 74" for the Weld-Craft 1648 Camo Duck Boat 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 1648 Camo Duck Boat 2011 and Weldcraft Marine Ocean King 220 2006 from the same manufacturer?

Yes — both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weldcraft Marine Ocean King 220 2006 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1648 Camo Duck Boat 2011 full specs ← Weldcraft Marine Ocean King 220 2006 full specs