Detailed Evaluation & Buyer Recommendation
Weld-Craft 1648 Camo Duck Boat 2011 vs Weld-Craft Duck 2012 — Same Brand, Different Boat
Matching a flat Weld-Craft 1648 Camo Duck Boat 2011 against a modified vee Weld-Craft Duck 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
Both boats share a closely matched power ceiling — 35 hp for the Weld-Craft 1648 Camo Duck Boat 2011 and 25 hp for the Weld-Craft Duck 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Bottom line: The Weld-Craft 1648 Camo Duck Boat 2011 and Weld-Craft Duck 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 Camo Duck Boat
ModelDuck
Model Year2011
Model Year2012
Measurements / Dimensions
Beam - Meters1.88
Beam - Meters1.65
Beam - Inches74
Beam - Inches65
Width [transom] - Detail49 in
Width [transom] - Detail42 in. bottom
Height - Detail22 in. side
Height - Detail19 in. side
Height - Meters0.56
Height - Meters0.48
Height - Inches22
Height - Inches19
Length - Feet16
Length - Feet15
Weight - Detailnot available
Weight - Detail260 lbs
Weight - kgnot available
Weight - kg117.93
Weight - lbs.not available
Weight - lbs.26
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.1
Hull thickness0.080 in
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Drive typeOutboard
Drive typeOutboard
Horsepower35 hp manual
Horsepower25 hp manual
Engine modelnot available
Engine model17 in. shaft
Operational Info
Maximum capacitynot available
Maximum capacity702 lbs
Maximum peoplenot available
Maximum people4
Weld-Craft 1648 Camo Duck Boat 2011 vs Weld-Craft Duck 2012 — Common Questions
Which is the larger boat — the Weld-Craft 1648 Camo Duck Boat 2011 or the Weld-Craft Duck 2012?
The Weld-Craft 1648 Camo Duck Boat 2011 is the longer of the two at 16,0 feet overall. The Weld-Craft Duck 2012 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1648 Camo Duck Boat 2011 is rated to a maximum of 35 hp, giving it the larger power ceiling. The Weld-Craft Duck 2012 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many passengers can the Weld-Craft Duck 2012 carry?
The Weld-Craft Duck 2012 has an official capacity rating of 4 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1648 Camo Duck Boat 2011 measures 74" wide, compared to 65" for the Weld-Craft Duck 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 Camo Duck Boat 2011 and Weld-Craft Duck 2012 from the same manufacturer?
Yes — both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weld-Craft Duck 2012 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.