Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine 240 Cuddy King 2008 - Boat Spec Comparison

Q: Which is the larger boat — the Weld-Craft 1648 Camo Duck Boat 2011 or the Weldcraft Marine 240 Cuddy King 2008?

The Weldcraft Marine 240 Cuddy King 2008 is the longer of the two at 24,0 feet overall. The Weld-Craft 1648 Camo Duck Boat 2011 comes in at 16,0 feet, making it roughly 8,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Weldcraft Marine 240 Cuddy King 2008 is rated to a maximum of 350 hp, giving it the larger power ceiling. The Weld-Craft 1648 Camo Duck Boat 2011 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many passengers can the Weldcraft Marine 240 Cuddy King 2008 carry?

The Weldcraft Marine 240 Cuddy King 2008 has an official capacity rating of 7 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Q: Which boat is wider, and does it affect trailering?

The Weldcraft Marine 240 Cuddy King 2008 measures 102" wide, compared to 74" for the Weld-Craft 1648 Camo Duck Boat 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Weld-Craft 1648 Camo Duck Boat 2011 and Weldcraft Marine 240 Cuddy King 2008 from the same manufacturer?

Yes — both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weldcraft Marine 240 Cuddy King 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine 240 Cuddy King 2008

Weld-Craft

Weld-Craft 1648 Camo Duck Boat 2011

2011

View full specs →

Weld-Craft

Weldcraft Marine 240 Cuddy King 2008

2008

View full specs →

Detailed Evaluation & Buyer Recommendation

Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine 240 Cuddy King 2008 — Same Brand, Different Boat

Matching a flat Weld-Craft 1648 Camo Duck Boat 2011 against a deep vee Weldcraft Marine 240 Cuddy King 2008 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 350 hp, the Weldcraft Marine 240 Cuddy King 2008 has a 315-hp advantage over the Weld-Craft 1648 Camo Duck Boat 2011's 35-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Bottom line: The Weldcraft Marine 240 Cuddy King 2008 at 24,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Weld-Craft 1648 Camo Duck Boat 2011 at 16,0 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.

General Boat Info

MakeWeld-Craft

MakeWeldcraft Marine

Model1648 Camo Duck Boat

Model240 Cuddy King

Model Year2011

Model Year2008

Measurements / Dimensions

Beam74 in

Beam102 in

Beam - Meters1.88

Beam - Meters2.59

Beam - Inches74

Beam - Inches102

Width [transom] - Detail49 in

Width [transom] - Detailnot available

Height - Detail22 in. side

Height - Detailnot available

Height - Meters0.56

Height - Metersnot available

Height - Inches22

Height - Inchesnot available

Length - Feet16

Length - Feet24

Deadrisenot available

Deadrise60℃ bow to 20℃ variable at transom

Weight - Detailnot available

Weight - Detail4,400 lbs

Weight - kgnot available

Weight - kg1995.8

Weight - lbs.not available

Weight - lbs.44

Length overall - Detailnot available

Length overall - Detail24 ft. 0 in

Length overall - Metersnot available

Length overall - Meters7.32

Length overall - Inchesnot available

Length overall - Inches288

Body / Hull

Hull materialAluminum

Hull thickness0.1

Hull thicknessnot available

Hull typeFlat

Hull typeDeep Vee

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Horsepower35 hp manual

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail130 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters492.1

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal13

Engine maxnot available

Engine maxSingle: 350 hp Twin (total): 450 hp

Weld-Craft 1648 Camo Duck Boat 2011 vs Weldcraft Marine 240 Cuddy King 2008 — Common Questions

Which is the larger boat — the Weld-Craft 1648 Camo Duck Boat 2011 or the Weldcraft Marine 240 Cuddy King 2008?

The Weldcraft Marine 240 Cuddy King 2008 is the longer of the two at 24,0 feet overall. The Weld-Craft 1648 Camo Duck Boat 2011 comes in at 16,0 feet, making it roughly 8,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Weldcraft Marine 240 Cuddy King 2008 is rated to a maximum of 350 hp, giving it the larger power ceiling. The Weld-Craft 1648 Camo Duck Boat 2011 tops out at 35 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many passengers can the Weldcraft Marine 240 Cuddy King 2008 carry?

The Weldcraft Marine 240 Cuddy King 2008 has an official capacity rating of 7 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.

Which boat is wider, and does it affect trailering?

The Weldcraft Marine 240 Cuddy King 2008 measures 102" wide, compared to 74" for the Weld-Craft 1648 Camo Duck Boat 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Weld-Craft 1648 Camo Duck Boat 2011 and Weldcraft Marine 240 Cuddy King 2008 from the same manufacturer?

Yes — both the Weld-Craft 1648 Camo Duck Boat 2011 and the Weldcraft Marine 240 Cuddy King 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Weld-Craft 1648 Camo Duck Boat 2011 full specs ← Weldcraft Marine 240 Cuddy King 2008 full specs