Weld-Craft 1648 Camo Duck Boat 2010 boat specs
Weld-Craft
Weld-Craft 1648 Camo Duck Boat 2010
2010
View full specs →
VS
Weld-Craft CDL 42 Pontoon (14 ft.) 2008 boat specs
Weld-Craft
Weld-Craft CDL 42 Pontoon (14 ft.) 2008
2008
View full specs →

Weld-Craft 1648 Camo Duck Boat 2010 vs Weld-Craft CDL 42 Pontoon (14 ft.) 2008 — Same Brand, Different Boat

Matching a flat Weld-Craft 1648 Camo Duck Boat 2010 against a pontoon Weld-Craft CDL 42 Pontoon (14 ft.) 2008 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Both boats share a closely matched power ceiling — 35 hp for the Weld-Craft 1648 Camo Duck Boat 2010 and 25 hp for the Weld-Craft CDL 42 Pontoon (14 ft.) 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Weld-Craft 1648 Camo Duck Boat 2010 and Weld-Craft CDL 42 Pontoon (14 ft.) 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1648 Camo Duck Boat
ModelCDL 42 Pontoon (14 ft.)
Model Year201
Model Year2008
Measurements / Dimensions
Beam70 in
Beam60 in
Beam - Meters1.78
Beam - Meters1.52
Beam - Inches7
Beam - Inches6
Height - DetailSide: 22 in
Height - DetailSide: 19 in
Height - Meters0.56
Height - Meters0.48
Height - Inches22
Height - Inches19
Length - Feet16
Length - Feet14
Length overall - Detail16 ft. 0 in
Length overall - Detail14 ft. 0 in
Length overall - Meters4.88
Length overall - Meters4.27
Length overall - Inches192
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typePontoon
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Engine max35 hp (manual)
Engine max25 hp (manual)

Weld-Craft 1648 Camo Duck Boat 2010 vs Weld-Craft CDL 42 Pontoon (14 ft.) 2008 — Common Questions

Which is the larger boat — the Weld-Craft 1648 Camo Duck Boat 2010 or the Weld-Craft CDL 42 Pontoon (14 ft.) 2008?
The Weld-Craft 1648 Camo Duck Boat 2010 is the longer of the two at 16,0 feet overall. The Weld-Craft CDL 42 Pontoon (14 ft.) 2008 comes in at 14,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1648 Camo Duck Boat 2010 is rated to a maximum of 35 hp, giving it the larger power ceiling. The Weld-Craft CDL 42 Pontoon (14 ft.) 2008 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1648 Camo Duck Boat 2010 is Coast Guard rated for 4 passengers, while the Weld-Craft CDL 42 Pontoon (14 ft.) 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Weld-Craft 1648 Camo Duck Boat 2010 measures 7" wide, compared to 6" for the Weld-Craft CDL 42 Pontoon (14 ft.) 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Weld-Craft 1648 Camo Duck Boat 2010 and Weld-Craft CDL 42 Pontoon (14 ft.) 2008 from the same manufacturer?
Yes — both the Weld-Craft 1648 Camo Duck Boat 2010 and the Weld-Craft CDL 42 Pontoon (14 ft.) 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.