Weld-Craft 1544 UV Econo Bass 2008 boat specs
Weld-Craft
Weld-Craft 1544 UV Econo Bass 2008
2008
View full specs →
VS
Weld-Craft RS 44 (15 ft.) 2008 boat specs
Weld-Craft
Weld-Craft RS 44 (15 ft.) 2008
2008
View full specs →

Weld-Craft 1544 UV Econo Bass 2008 vs Weld-Craft RS 44 (15 ft.) 2008 — A Close Look at Two Flats

When two boats share the same hull type — in this case both the Weld-Craft 1544 UV Econo Bass 2008 and the Weld-Craft RS 44 (15 ft.) 2008 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

The power gap is worth calling out. Rated to 50 hp, the Weld-Craft 1544 UV Econo Bass 2008 has a 25-hp advantage over the Weld-Craft RS 44 (15 ft.) 2008's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Weld-Craft 1544 UV Econo Bass 2008 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Weld-Craft RS 44 (15 ft.) 2008 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeWeld-Craft
MakeWeld-Craft
Model1544 UV Econo Bass
ModelRS 44 (15 ft.)
Model Year2008
Model Year2008
Measurements / Dimensions
Beam66 in
Beam66 in
Beam - Meters1.68
Beam - Meters1.68
Beam - Inches66
Beam - Inches66
Height - DetailSide: 22 in
Height - DetailSide: 22 in
Height - Meters0.56
Height - Meters0.56
Height - Inches22
Height - Inches22
Length - Feet15
Length - Feet15
Length overall - Detail15 ft
Length overall - Detail15 ft. 0 in
Length overall - Meters4.57
Length overall - Meters4.57
Length overall - Inches18
Length overall - Inches18
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeNone
Engine max50 hp (remote)
Engine max25 hp (manual)

Weld-Craft 1544 UV Econo Bass 2008 vs Weld-Craft RS 44 (15 ft.) 2008 — Common Questions

Which is the larger boat — the Weld-Craft 1544 UV Econo Bass 2008 or the Weld-Craft RS 44 (15 ft.) 2008?
The Weld-Craft RS 44 (15 ft.) 2008 is the longer of the two at 15,0 feet overall. The Weld-Craft 1544 UV Econo Bass 2008 comes in at 15,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which boat can handle a bigger outboard?
The Weld-Craft 1544 UV Econo Bass 2008 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Weld-Craft RS 44 (15 ft.) 2008 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Weld-Craft 1544 UV Econo Bass 2008 is Coast Guard rated for 4 passengers, while the Weld-Craft RS 44 (15 ft.) 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Weld-Craft 1544 UV Econo Bass 2008 and Weld-Craft RS 44 (15 ft.) 2008 share an 66 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Weld-Craft 1544 UV Econo Bass 2008 and Weld-Craft RS 44 (15 ft.) 2008 from the same manufacturer?
Yes — both the Weld-Craft 1544 UV Econo Bass 2008 and the Weld-Craft RS 44 (15 ft.) 2008 are built by Weld-Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.