Matching a inflatable rigid Walker Bay 270 RTD/RTDH 2008 against a modified vee Walker Bay Walker Bay 10 2011 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department — Walker Bay 270 RTD/RTDH 2008 at 8,0 ft versus Walker Bay Walker Bay 10 2011 at 9,7 ft. At 124 lbs and 125 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
Both boats share a closely matched power ceiling — 10 hp for the Walker Bay 270 RTD/RTDH 2008 and 3 hp for the Walker Bay Walker Bay 10 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 3 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Walker Bay 270 RTD/RTDH 2008 comes in at 12 lbs per hp versus 42 lbs per hp for the Walker Bay Walker Bay 10 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
The Walker Bay 270 RTD/RTDH 2008 has a documented top speed of 19 mph. Speed data wasn't available for the other model.
Bottom line: The Walker Bay 270 RTD/RTDH 2008 and Walker Bay Walker Bay 10 2011 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.