Detailed Evaluation & Buyer Recommendation
ThunderJet Landing Craft CC 22 ft. 2013 vs ThunderJet Rio Classic 2012 — A Close Look at Two Modified Vees
When two boats share the same hull type — in this case both the ThunderJet Landing Craft CC 22 ft. 2013 and the ThunderJet Rio Classic 2012 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
On paper these two are close siblings in the size department — ThunderJet Landing Craft CC 22 ft. 2013 at 22,0 ft versus ThunderJet Rio Classic 2012 at 22,0 ft. At 23 lbs and 42 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 250 hp, the ThunderJet Landing Craft CC 22 ft. 2013 has a 218-hp advantage over the ThunderJet Rio Classic 2012's 32-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the ThunderJet Landing Craft CC 22 ft. 2013 carries 48 gallons versus 8 gallons in the ThunderJet Rio Classic 2012. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
Bottom line: Performance buyers should lean toward the ThunderJet Landing Craft CC 22 ft. 2013 and its 250-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the ThunderJet Rio Classic 2012 with its 32-hp rating is the more economical daily driver.
General Boat Info
MakeThunderJet
MakeThunderJet
ModelLanding Craft CC 22 ft
ModelRio Classic
Model Year2013
Model Year2012
Measurements / Dimensions
Beam - Meters2.59
Beam - Meters2.59
Beam - Inches102
Beam - Inches102
Deadrise16°
Deadrise14°
Weight - Detail2,300 lbs
Weight - Detail4,200 lbs
Weight - kg1043.26
Weight - kg1905.09
Weight - lbs.23
Weight - lbs.42
Width [transom] - DetailBottom: 90 in
Width [transom] - DetailBottom: 78 in
Height - DetailSides: 34 in
Height - DetailSides: 35 in
Height - Meters0.86
Height - Meters0.89
Height - Inches34
Height - Inches35
Height [transom]34 in
Height [transom]35 in
Length - Feet22
Length - Feet22
Length overall - Detail22 ft
Length overall - Detail22 ft
Length overall - Meters6.71
Length overall - Meters6.71
Length overall - Inches264
Length overall - Inches264
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessSides: 0.19 in. Bottom: 0.19 in. Transom: 0.25 in
Hull thicknessSides: 0.125 in. Bottom: 0.250 in. Transom: 0.190 in
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail48 gal
Fuel tank capacity - Detail80 gal
Fuel tank capacity - Liters181.7
Fuel tank capacity - Liters302.83
Fuel tank capacity - Gal48
Fuel tank capacity - Gal8
Drive typeOutboard
Drive typeJet Drive
Engine max250 hp
Engine maxnot available
Engine/s standardnot available
Engine/s standard350 cid multi port fuel injected GM Vortec closed cooling system
Exhaustnot available
ExhaustCatalyzed exhaust with KLS mufflers and intake water strainer (sand trap)
Impellernot available
ImpellerTurbo
Jet pumpnot available
Jet pumpHamilton Jet 212 axial flow with JT nozzle, split duct reverse and close coupling
Horsepowernot available
Horsepower32
Operational Info
Maximum capacityCargo: 1,900 lbs
Maximum capacitynot available
Trailer Info
Trailer - Detailnot available
Trailer - DetailGateway 8,300 lbs. capacity galvanized tandem axle bunk