Starweld 1674 TL 2013 boat specs
Starweld
Starweld 1674 TL 2013
2013
View full specs →
VS
Starweld 1700 2013 boat specs
Starweld
Starweld 1700 2013
2013
View full specs →

Starweld 1674 TL 2013 vs Starweld 1700 2013 — A Close Look at Two Deep Vees

When two boats share the same hull type — in this case both the Starweld 1674 TL 2013 and the Starweld 1700 2013 are deep vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Starweld 1674 TL 2013 at 16,3 ft versus Starweld 1700 2013 at 16,5 ft. Weight tells a clearer story for trailering families: the Starweld 1700 2013 tips the scales at 1 075 lbs — 420 lbs less than the Starweld 1674 TL 2013 at 655 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the Starweld 1700 2013 has a 65-hp advantage over the Starweld 1674 TL 2013's 50-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Starweld 1700 2013 comes in at 9 lbs per hp versus 13 lbs per hp for the Starweld 1674 TL 2013. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Starweld 1700 2013 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Starweld 1674 TL 2013 with its 50-hp rating is the more economical daily driver.
General Boat Info
MakeStarweld
MakeStarweld
Model1674 TL
Model17
Model Year2013
Model Year2013
Measurements / Dimensions
Beam73 in
Beam90 in
Beam - Meters1.85
Beam - Meters2.29
Beam - Inches73
Beam - Inches9
Depth - Detail20 in
Depth - Detail27 in
Depth - Centimeters50.8
Depth - Centimeters68.58
Depth - Inches2
Depth - Inches27
Weight - Detail655 lbs
Weight - Detail1,075 lbs
Weight - kg297.1
Weight - kg487.61
Weight - lbs.655
Weight - lbs.1075
Width [transom] - Detail70 in
Width [transom] - Detail90 in
Height [transom]20 in
Height [transom]20 in
Length - Feet16.33
Length - Feet16.5
Length overall - Detail16 ft. 4 in
Length overall - Detail16 ft. 6 in
Length overall - Meters4.98
Length overall - Meters5.03
Length overall - Inches196
Length overall - Inches198
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine makeMercury
Engine makeMercury
Engine model25ELHPT
Engine model90 ELPT
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 hp
Engine max115 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail30 gal
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal3
Operational Info
Maximum capacity1,215 lbs
Maximum capacity1,410 lbs
Maximum people6
Maximum people6
Trailer Info
Trailer - Length over all20 ft. 6 in
Trailer - Length over all21 ft. 6 in

Starweld 1674 TL 2013 vs Starweld 1700 2013 — Common Questions

Which is the larger boat — the Starweld 1674 TL 2013 or the Starweld 1700 2013?
The Starweld 1700 2013 is the longer of the two at 16,5 feet overall. The Starweld 1674 TL 2013 comes in at 16,3 feet, making it roughly 0,2 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Starweld 1674 TL 2013 or the Starweld 1700 2013?
For trailering, the Starweld 1674 TL 2013 has the edge at 655 lbs dry weight versus 1 075 lbs for the Starweld 1700 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Starweld 1700 2013 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Starweld 1674 TL 2013 tops out at 50 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Starweld 1674 TL 2013 is Coast Guard rated for 6 passengers, while the Starweld 1700 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Starweld 1700 2013 has a better power-to-weight ratio at 9 lbs per hp compared to 13 lbs per hp for the Starweld 1674 TL 2013. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Starweld 1674 TL 2013 measures 73" wide, compared to 9" for the Starweld 1700 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Starweld 1674 TL 2013 and Starweld 1700 2013 from the same manufacturer?
Yes — both the Starweld 1674 TL 2013 and the Starweld 1700 2013 are built by Starweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.