Stamas 317 Tarpon Inboard 2012 boat specs
Stamas
Stamas 317 Tarpon Inboard 2012
2012
View full specs →
VS
Stamas 326 Aegean Outboard 2012 boat specs
Stamas
Stamas 326 Aegean Outboard 2012
2012
View full specs →

Stamas 317 Tarpon Inboard 2012 vs Stamas 326 Aegean Outboard 2012 — A Close Look at Two Deep Vees

When two boats share the same hull type — in this case both the Stamas 317 Tarpon Inboard 2012 and the Stamas 326 Aegean Outboard 2012 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Stamas 317 Tarpon Inboard 2012 at 31,6 ft versus Stamas 326 Aegean Outboard 2012 at 32,5 ft. At 63 lbs and 102 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The Stamas 326 Aegean Outboard 2012 tops out at 600 hp. Engine specs for the Stamas 317 Tarpon Inboard 2012 aren't listed — confirm with a dealer before selecting an outboard.Both carry nearly identical fuel loads — 2 gal and 3 gal — so range won't be a tiebreaker here.

Both boats are rated for 10 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Stamas 317 Tarpon Inboard 2012 and Stamas 326 Aegean Outboard 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeStamas
MakeStamas
Model317 Tarpon Inboard
Model326 Aegean Outboard
Model Year2012
Model Year2012
Measurements / Dimensions
Beam10 ft. 4 in. (3.15 m)
Beam11 ft. 2 in. (3.4 m)
Beam - Meters3.15
Beam - Meters3.4
Beam - Inches124
Beam - Inches134
Bridge clearance - DetailWithout Top: 6 ft. 10 in. (1.85 m) With Standard Hardtop: 9 ft. 4 in. (2.86 m)
Bridge clearance - DetailWithout Top: 7 ft. 2 in. (2.18 m) With Standard Hardtop: 10 ft. 2 in. (3.1 m)
Bridge clearance - Meters2.84
Bridge clearance - Meters3.1
Bridge clearance - Inches112
Bridge clearance - Inches122
Draft [max] - Detail28 in. (0.71 m) (average)
Draft [max] - Detail18 in. (0.46 m) (hull only)
Draft [max] - Meters0.71
Draft [max] - Meters0.46
Draft [max] - Inches28
Draft [max] - Inches18
Weight - Detail6,300 lbs. (2,858 kg)
Weight - Detail10,200 lbs. (5,760.6 kg)
Weight - kg2857.63
Weight - kg4626.64
Weight - lbs.63
Weight - lbs.102
Length - Feet31.58
Length - Feet32.5
Length overall - Detail31 ft. 7 in. (9.63 m) Rigged with Power: 33 ft. 7 in. (10.27 m)
Length overall - Detail32 ft. 6 in. (10.49 m) Rigged with Power: 34 ft. 6 in. (10.54 m)
Length overall - Meters10.24
Length overall - Meters10.52
Length overall - Inches403
Length overall - Inches414
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine/s standard240 hp (179 kW)
Engine/s standardnot available
Fuel tank capacity - Detail200 gal. (757 l)
Fuel tank capacity - Detail300 gal. (1,135.5 l)
Fuel tank capacity - Liters757.08
Fuel tank capacity - Liters1135.62
Fuel tank capacity - Gal2
Fuel tank capacity - Gal3
Fuel typeGas
Fuel typeGas
Drive typeInboard
Drive typeOutboard
Engine maxnot available
Engine max600 hp (447.6 kW)
Operational Info
Water capacity20 gal. (75.7 l)
Water capacity40 gal. (151.4 l)
Headroomnot available
Headroom6 ft. 4 in. (1.93 m)
Sleeping capacitynot available
Sleeping capacity4

Stamas 317 Tarpon Inboard 2012 vs Stamas 326 Aegean Outboard 2012 — Common Questions

Which is the larger boat — the Stamas 317 Tarpon Inboard 2012 or the Stamas 326 Aegean Outboard 2012?
The Stamas 326 Aegean Outboard 2012 is the longer of the two at 32,5 feet overall. The Stamas 317 Tarpon Inboard 2012 comes in at 31,6 feet, making it roughly 0,9 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Stamas 317 Tarpon Inboard 2012 or the Stamas 326 Aegean Outboard 2012?
For trailering, the Stamas 317 Tarpon Inboard 2012 has the edge at 63 lbs dry weight versus 102 lbs for the Stamas 326 Aegean Outboard 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Stamas 326 Aegean Outboard 2012 has a documented max rating of 600 hp. Engine specifications for the Stamas 317 Tarpon Inboard 2012 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Stamas 317 Tarpon Inboard 2012 is Coast Guard rated for 10 passengers, while the Stamas 326 Aegean Outboard 2012 is certified for 10. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Stamas 326 Aegean Outboard 2012 measures 134" wide, compared to 124" for the Stamas 317 Tarpon Inboard 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Stamas 317 Tarpon Inboard 2012 and Stamas 326 Aegean Outboard 2012?
Both boats carry similar fuel loads — 2 gallons and 3 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Stamas 317 Tarpon Inboard 2012 and Stamas 326 Aegean Outboard 2012 from the same manufacturer?
Yes — both the Stamas 317 Tarpon Inboard 2012 and the Stamas 326 Aegean Outboard 2012 are built by Stamas. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.