Detailed Evaluation & Buyer Recommendation
SouthWind 229 FF 2010 vs SouthWind 2400 SD 2013: Same Brand, Different Boat
The SouthWind 229 FF 2010 is a tri-hull design and the SouthWind 2400 SD 2013 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - SouthWind 229 FF 2010 at 22,8 ft versus SouthWind 2400 SD 2013 at 25,5 ft. Weight tells a clearer story for trailering families: the SouthWind 2400 SD 2013 tips the scales at 5 100 lbs - 1 600 lbs less than the SouthWind 229 FF 2010 at 3 500 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 200 hp, the SouthWind 2400 SD 2013 has a 85-hp advantage over the SouthWind 229 FF 2010's 115-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the SouthWind 2400 SD 2013 carries 55 gallons versus 35 gallons in the SouthWind 229 FF 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The SouthWind 2400 SD 2013 is rated for 12 passengers, while the SouthWind 229 FF 2010 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SouthWind 2400 SD 2013 could be the deciding factor.
Bottom line: Choose the SouthWind 2400 SD 2013 if your priority is putting more people on the water - it handles 12 passengers and at 25,5 ft it has the deck room to back that rating up comfortably. The SouthWind 229 FF 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 11 that costs less to run day-to-day.
General Boat Info
MakeSouthWind
MakeSouthWind
Model Year2010
Model Year2013
Measurements / Dimensions
Beam8 ft. 6 in.
Beam8 ft. 6 in.
Beam - Meters2.59
Beam - Meters2.59
Beam - Inches102
Beam - Inches102
Deadrise12℃
Deadrise20°
Draft [drive up] - Detail12 in.
Draft [drive up] - Detail15 in.
Draft [drive up] meters0.3
Draft [drive up] meters0.38
Draft [drive up] inches12
Draft [drive up] inches15
Weight - Detail3,500 lbs.
Weight - Detail3,722 lbs. dry 5,100 lbs. wet
Weight - kg1587.57
Weight - kg2313.32
Weight - lbs.3500
Weight - lbs.5100
Length - Feet22.75
Length - Feet25.5
Length overall - Detail22 ft. 9 in.
Length overall - Detail25 ft. 6 in.
Length overall - Meters6.93
Length overall - Meters7.77
Length overall - Inches273
Length overall - Inches306
Bridge clearance - Detailnot available
Bridge clearance - Detail51 in.
Bridge clearance - Metersnot available
Bridge clearance - Meters1.3
Bridge clearance - Inchesnot available
Bridge clearance - Inches51
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeTri-Hull
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail35 gal.
Fuel tank capacity - Detail55 gal.
Fuel tank capacity - Liters132.49
Fuel tank capacity - Liters208.2
Fuel tank capacity - Gal35
Fuel tank capacity - Gal55
Drive typeOutboard
Drive typeOutboard
Engine max115 - 225 hp
Engine max200 - 300 hp
Operational Info
Maximum capacity1,550 lbs.
Maximum capacity2,400 lbs.
Maximum people11
Maximum people12
Water capacitynot available
Water capacity12.5 gal.