SouthWind 200 SD 2012 boat specs
SouthWind
SouthWind 200 SD 2012
2012
View full specs →
VS
SouthWind 2200 SD 2013 boat specs
SouthWind
SouthWind 2200 SD 2013
2013
View full specs →

SouthWind 200 SD 2012 vs SouthWind 2200 SD 2013 — Same Brand, Different Boat

Matching a modified vee SouthWind 200 SD 2012 against a deep vee SouthWind 2200 SD 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — SouthWind 200 SD 2012 at 20,5 ft versus SouthWind 2200 SD 2013 at 23,5 ft. At 37 lbs and 47 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 150 hp, the SouthWind 2200 SD 2013 has a 35-hp advantage over the SouthWind 200 SD 2012's 115-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the SouthWind 2200 SD 2013 carries 55 gallons versus 5 gallons in the SouthWind 200 SD 2012. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 1 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The SouthWind 2200 SD 2013 at 23,5 ft is the right call if deck space, comfort, and entertaining are top of your list. The SouthWind 200 SD 2012 at 20,5 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeSouthWind
MakeSouthWind
Model200 SD
Model2200 SD
Model Year2012
Model Year2013
Measurements / Dimensions
Beam8 ft. 6 in
Beam8 ft. 6 in
Beam - Meters2.59
Beam - Meters2.59
Beam - Inches102
Beam - Inches102
Deadrise16°
Deadrise20°
Draft [drive up] - Detail13 in
Draft [drive up] - Detail15 in
Draft [drive up] meters0.33
Draft [drive up] meters0.38
Draft [drive up] inches13
Draft [drive up] inches15
Weight - Detail2,500 lbs. dry 3,700 lbs. wet
Weight - Detail3,359 lbs. dry 4,700 lbs. wet
Weight - kg1678.29
Weight - kg2131.88
Weight - lbs.37
Weight - lbs.47
Length - Feet20.5
Length - Feet23.5
Length overall - Detail20 ft. 6 in
Length overall - Detail25 ft. 6 in
Length overall - Meters6.25
Length overall - Meters7.77
Length overall - Inches246
Length overall - Inches306
Bridge clearance - Detailnot available
Bridge clearance - Detail51 in
Bridge clearance - Metersnot available
Bridge clearance - Meters1.3
Bridge clearance - Inchesnot available
Bridge clearance - Inches51
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail50 gal
Fuel tank capacity - Detail55 gal
Fuel tank capacity - Liters189.27
Fuel tank capacity - Liters208.2
Fuel tank capacity - Gal5
Fuel tank capacity - Gal55
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max115 - 200 hp
Engine max150 - 250 hp
Operational Info
Water capacity6 gal
Water capacity12.5 gal
Maximum capacity1,550 lbs
Maximum capacity2,100 lbs
Maximum people1
Maximum people1

SouthWind 200 SD 2012 vs SouthWind 2200 SD 2013 — Common Questions

Which is the larger boat — the SouthWind 200 SD 2012 or the SouthWind 2200 SD 2013?
The SouthWind 2200 SD 2013 is the longer of the two at 23,5 feet overall. The SouthWind 200 SD 2012 comes in at 20,5 feet, making it roughly 3,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the SouthWind 200 SD 2012 or the SouthWind 2200 SD 2013?
For trailering, the SouthWind 200 SD 2012 has the edge at 37 lbs dry weight versus 47 lbs for the SouthWind 2200 SD 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SouthWind 2200 SD 2013 is rated to a maximum of 150 hp, giving it the larger power ceiling. The SouthWind 200 SD 2012 tops out at 115 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SouthWind 200 SD 2012 is Coast Guard rated for 1 passengers, while the SouthWind 2200 SD 2013 is certified for 1. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the SouthWind 200 SD 2012 and SouthWind 2200 SD 2013 share an 8 ft. 6 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Which boat has the larger fuel tank — the SouthWind 200 SD 2012 or the SouthWind 2200 SD 2013?
The SouthWind 2200 SD 2013 has the bigger tank at 55 gallons, versus 5 gallons on the SouthWind 200 SD 2012. That 50-gallon difference translates to roughly 150–250 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the SouthWind 200 SD 2012 and SouthWind 2200 SD 2013 from the same manufacturer?
Yes — both the SouthWind 200 SD 2012 and the SouthWind 2200 SD 2013 are built by SouthWind. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.