Smoker Craft 1032 2012 boat specs
Smoker Craft
Smoker Craft 1032 2012
2012
View full specs →
VS
Smoker Craft 1436 2010 boat specs
Smoker Craft
Smoker Craft 1436 2010
2010
View full specs →

Smoker Craft 1032 2012 vs Smoker Craft 1436 2010 — Which Modified Vee Fits Your Needs?

When two boats share the same hull type — in this case both the Smoker Craft 1032 2012 and the Smoker Craft 1436 2010 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Size is the most obvious dividing line here. The Smoker Craft 1436 2010 measures 14,0 feet overall (2010), giving it roughly 13,0 additional feet of deck space compared to the Smoker Craft 1032 2012 at 1,0 feet (2012). Weight tells a clearer story for trailering families: the Smoker Craft 1436 2010 tips the scales at 185 lbs — 184 lbs less than the Smoker Craft 1032 2012 at 1 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 3 hp for the Smoker Craft 1032 2012 and 20 hp for the Smoker Craft 1436 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Smoker Craft 1436 2010 is rated for 3 passengers, while the Smoker Craft 1032 2012 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Smoker Craft 1436 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Smoker Craft 1032 2012 comes in at 0 lbs per hp versus 9 lbs per hp for the Smoker Craft 1436 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Smoker Craft 1436 2010 if your priority is putting more people on the water — it handles 3 passengers and at 14,0 ft it has the deck room to back that rating up comfortably. The Smoker Craft 1032 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeSmoker Craft
MakeSmoker Craft
Model1032
Model1436
Model Year2012
Model Year201
Measurements / Dimensions
Beam51 in
Beam57 in
Beam - Meters1.3
Beam - Meters1.45
Beam - Inches51
Beam - Inches57
Depth - Detail16 in
Depth - Detail18 in
Depth - Centimeters40.64
Depth - Centimeters45.72
Depth - Inches16
Depth - Inches18
Weight - Detail100 lbs
Weight - Detail185 lbs
Weight - kg45.36
Weight - kg83.91
Weight - lbs.1
Weight - lbs.185
Width [transom] - Detail50 in
Width [transom] - Detail56 in
Height [transom]SS
Height [transom]SS
Length - Feet1
Length - Feet14
Length overall - Detail10 ft
Length overall - Detail14 ft
Length overall - Meters3.05
Length overall - Meters4.27
Length overall - Inches12
Length overall - Inches168
Height - Detailnot available
Height - Detail18 in
Height - Metersnot available
Height - Meters0.46
Height - Inchesnot available
Height - Inches18
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom, Side, & Rib Gauges: 0.050 in
Hull thicknessBottom Gauge: 0.064 Side Gauge: 0.064 Rib Gauge: 0.064
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max3 hp
Engine max20 hp
Operational Info
Maximum capacity290 lbs
Maximum capacity650 lbs
Maximum people2
Maximum people3

Smoker Craft 1032 2012 vs Smoker Craft 1436 2010 — Common Questions

Which is the larger boat — the Smoker Craft 1032 2012 or the Smoker Craft 1436 2010?
The Smoker Craft 1436 2010 is the longer of the two at 14,0 feet overall. The Smoker Craft 1032 2012 comes in at 1,0 feet, making it roughly 13,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Smoker Craft 1032 2012 or the Smoker Craft 1436 2010?
For trailering, the Smoker Craft 1032 2012 has the edge at 1 lbs dry weight versus 185 lbs for the Smoker Craft 1436 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Smoker Craft 1436 2010 is rated to a maximum of 20 hp, giving it the larger power ceiling. The Smoker Craft 1032 2012 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Smoker Craft 1032 2012 is Coast Guard rated for 2 passengers, while the Smoker Craft 1436 2010 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Smoker Craft 1032 2012 has a better power-to-weight ratio at 0 lbs per hp compared to 9 lbs per hp for the Smoker Craft 1436 2010. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Smoker Craft 1436 2010 measures 57" wide, compared to 51" for the Smoker Craft 1032 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Smoker Craft 1032 2012 and Smoker Craft 1436 2010 from the same manufacturer?
Yes — both the Smoker Craft 1032 2012 and the Smoker Craft 1436 2010 are built by Smoker Craft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.