SeaArk DXS 1860 SLD 2012 boat specs
SeaArk
SeaArk DXS 1860 SLD 2012
2012
View full specs →
VS
SeaArk Jet Tunnel 1652MVJT 2008 boat specs
SeaArk
SeaArk Jet Tunnel 1652MVJT 2008
2008
View full specs →

SeaArk DXS 1860 SLD 2012 vs SeaArk Jet Tunnel 1652MVJT 2008: Same Brand, Different Boat

The SeaArk DXS 1860 SLD 2012 is a modified-V design and the SeaArk Jet Tunnel 1652MVJT 2008 is a tunnel hull design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk DXS 1860 SLD 2012 at 18,0 ft versus SeaArk Jet Tunnel 1652MVJT 2008 at 16,0 ft. Weight tells a clearer story for trailering families: the SeaArk DXS 1860 SLD 2012 tips the scales at 530 lbs - 185 lbs more than the SeaArk Jet Tunnel 1652MVJT 2008 at 345 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 60 hp for the SeaArk DXS 1860 SLD 2012 and 45 hp for the SeaArk Jet Tunnel 1652MVJT 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk Jet Tunnel 1652MVJT 2008 comes in at 8 lbs per hp versus 9 lbs per hp for the SeaArk DXS 1860 SLD 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The SeaArk DXS 1860 SLD 2012 and SeaArk Jet Tunnel 1652MVJT 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeSeaArk
MakeSeaArk
ModelDXS 1860 SLD
ModelJet Tunnel 1652MVJT
Model Year2012
Model Year2008
Measurements / Dimensions
Beam84 in.
Beam72 in.
Beam - Meters2.13
Beam - Meters1.83
Beam - Inches84
Beam - Inches72
Depth - Detail24 in.
Depth - Detail20 in.
Depth - Centimeters60.96
Depth - Centimeters50.8
Depth - Inches24
Depth - Inches20
Weight - Detail530 lbs.
Weight - Detail345 lbs.
Weight - kg240.4
Weight - kg156.49
Weight - lbs.530
Weight - lbs.345
Width [transom] - DetailBottom: 60 in.
Width [transom] - Detail52 in.
Length - Feet18
Length - Feet16
Length overall - Detail18 ft.
Length overall - Detail16 ft. 0 in.
Length overall - Meters5.49
Length overall - Meters4.88
Length overall - Inches216
Length overall - Inches192
Height [transom]not available
Height [transom]20 in.
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thickness0.1
Hull typeModified Vee
Hull typeTunnel
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max60 hp
Engine max45 hp
Operational Info
Maximum capacitynot available
Maximum capacity1,100 lbs.
Maximum peoplenot available
Maximum people5 / 735 lbs.

SeaArk DXS 1860 SLD 2012 vs SeaArk Jet Tunnel 1652MVJT 2008 - Common Questions

Which is the larger boat - the SeaArk DXS 1860 SLD 2012 or the SeaArk Jet Tunnel 1652MVJT 2008?
The SeaArk DXS 1860 SLD 2012 is the longer of the two at 18,0 feet overall. The SeaArk Jet Tunnel 1652MVJT 2008 comes in at 16,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk DXS 1860 SLD 2012 or the SeaArk Jet Tunnel 1652MVJT 2008?
For trailering, the SeaArk Jet Tunnel 1652MVJT 2008 has the edge at 345 lbs dry weight versus 530 lbs for the SeaArk DXS 1860 SLD 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk DXS 1860 SLD 2012 is rated to a maximum of 60 hp, giving it the larger power ceiling. The SeaArk Jet Tunnel 1652MVJT 2008 tops out at 45 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk DXS 1860 SLD 2012 is Coast Guard rated for 5 passengers, while the SeaArk Jet Tunnel 1652MVJT 2008 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk Jet Tunnel 1652MVJT 2008 has a better power-to-weight ratio at 8 lbs per hp compared to 9 lbs per hp for the SeaArk DXS 1860 SLD 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk DXS 1860 SLD 2012 measures 84" wide, compared to 72" for the SeaArk Jet Tunnel 1652MVJT 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk DXS 1860 SLD 2012 and SeaArk Jet Tunnel 1652MVJT 2008 from the same manufacturer?
Yes - both the SeaArk DXS 1860 SLD 2012 and the SeaArk Jet Tunnel 1652MVJT 2008 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.