SeaArk Cast & Blast 150 2008 boat specs
SeaArk
SeaArk Cast & Blast 150 2008
2008
View full specs →
VS
SeaArk RX 160 2013 boat specs
SeaArk
SeaArk RX 160 2013
2013
View full specs →

SeaArk Cast & Blast 150 2008 vs SeaArk RX 160 2013: A Close Look at Two Modified-V Boats

Both the SeaArk Cast & Blast 150 2008 and the SeaArk RX 160 2013 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - SeaArk Cast & Blast 150 2008 at 15,0 ft versus SeaArk RX 160 2013 at 16,0 ft. Weight tells a clearer story for trailering families: the SeaArk Cast & Blast 150 2008 tips the scales at 550 lbs - 125 lbs more than the SeaArk RX 160 2013 at 425 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 40 hp for the SeaArk Cast & Blast 150 2008 and 60 hp for the SeaArk RX 160 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk RX 160 2013 comes in at 7 lbs per hp versus 14 lbs per hp for the SeaArk Cast & Blast 150 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the SeaArk RX 160 2013 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the SeaArk Cast & Blast 150 2008 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeSeaArk
MakeSeaArk
ModelCast & Blast 150
ModelRX 160
Model Year2008
Model Year2013
Measurements / Dimensions
Beam67 in.
Beam72 in.
Beam - Meters1.7
Beam - Meters1.83
Beam - Inches67
Beam - Inches72
Depth - Detail20 in.
Depth - Detail20 in.
Depth - Centimeters50.8
Depth - Centimeters50.8
Depth - Inches20
Depth - Inches20
Weight - Detail550 lbs.
Weight - Detail425 lbs.
Weight - kg249.48
Weight - kg192.78
Weight - lbs.550
Weight - lbs.425
Width [transom] - Detail48 in.
Width [transom] - DetailBottom: 52 in.
Height [transom]20 in.
Height [transom]not available
Length - Feet15
Length - Feet16
Length overall - Detail15 ft. 0 in.
Length overall - Detail16 ft.
Length overall - Meters4.57
Length overall - Meters4.88
Length overall - Inches180
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.1
Hull thickness0.100 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typenot available
Engine max40 hp
Engine max60 hp
Operational Info
Maximum capacity830 lbs.
Maximum capacitynot available
Maximum people4 / 465 lbs.
Maximum peoplenot available

SeaArk Cast & Blast 150 2008 vs SeaArk RX 160 2013 - Common Questions

Which is the larger boat - the SeaArk Cast & Blast 150 2008 or the SeaArk RX 160 2013?
The SeaArk RX 160 2013 is the longer of the two at 16,0 feet overall. The SeaArk Cast & Blast 150 2008 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk Cast & Blast 150 2008 or the SeaArk RX 160 2013?
For trailering, the SeaArk RX 160 2013 has the edge at 425 lbs dry weight versus 550 lbs for the SeaArk Cast & Blast 150 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk RX 160 2013 is rated to a maximum of 60 hp, giving it the larger power ceiling. The SeaArk Cast & Blast 150 2008 tops out at 40 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk Cast & Blast 150 2008 is Coast Guard rated for 4 passengers, while the SeaArk RX 160 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk RX 160 2013 has a better power-to-weight ratio at 7 lbs per hp compared to 14 lbs per hp for the SeaArk Cast & Blast 150 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk RX 160 2013 measures 72" wide, compared to 67" for the SeaArk Cast & Blast 150 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk Cast & Blast 150 2008 and SeaArk RX 160 2013 from the same manufacturer?
Yes - both the SeaArk Cast & Blast 150 2008 and the SeaArk RX 160 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.