SeaArk BayFisher MVT 2013 boat specs
SeaArk
SeaArk BayFisher MVT 2013
2013
View full specs →
VS
SeaArk DXS 1860 SLD 2013 boat specs
SeaArk
SeaArk DXS 1860 SLD 2013
2013
View full specs →

SeaArk BayFisher MVT 2013 vs SeaArk DXS 1860 SLD 2013: Same Brand, Different Boat

The SeaArk BayFisher MVT 2013 is a tunnel hull design and the SeaArk DXS 1860 SLD 2013 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk BayFisher MVT 2013 at 20,1 ft versus SeaArk DXS 1860 SLD 2013 at 18,0 ft. Weight tells a clearer story for trailering families: the SeaArk BayFisher MVT 2013 tips the scales at 1 190 lbs - 660 lbs more than the SeaArk DXS 1860 SLD 2013 at 530 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 140 hp, the SeaArk BayFisher MVT 2013 has a 80-hp advantage over the SeaArk DXS 1860 SLD 2013's 60-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The SeaArk BayFisher MVT 2013 is rated for 6 passengers, while the SeaArk DXS 1860 SLD 2013 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk BayFisher MVT 2013 could be the deciding factor.

Bottom line: Choose the SeaArk BayFisher MVT 2013 if your priority is putting more people on the water - it handles 6 passengers and at 20,1 ft it has the deck room to back that rating up comfortably. The SeaArk DXS 1860 SLD 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
ModelBayFisher MVT
ModelDXS 1860 SLD
Model Year2013
Model Year2013
Measurements / Dimensions
Beam95 in.
Beam82 in.
Beam - Meters2.41
Beam - Meters2.08
Beam - Inches95
Beam - Inches82
Depth - Detail28 in.
Depth - Detail24 in.
Depth - Centimeters71.12
Depth - Centimeters60.96
Depth - Inches28
Depth - Inches24
Weight - Detail1,190 lbs.
Weight - Detail530 lbs.
Weight - kg539.77
Weight - kg240.4
Weight - lbs.1190
Weight - lbs.530
Width [transom] - DetailBottom: 72 in.
Width [transom] - DetailBottom: 60 in.
Length - Feet20.08
Length - Feet18
Length overall - Detail20 ft. 1 in.
Length overall - Detail18 ft.
Length overall - Meters6.12
Length overall - Meters5.49
Length overall - Inches241
Length overall - Inches216
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.125 in.
Hull thickness0.100 in.
Hull typeTunnel
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail30 gal.
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal30
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max140 hp
Engine max60 hp

SeaArk BayFisher MVT 2013 vs SeaArk DXS 1860 SLD 2013 - Common Questions

Which is the larger boat - the SeaArk BayFisher MVT 2013 or the SeaArk DXS 1860 SLD 2013?
The SeaArk BayFisher MVT 2013 is the longer of the two at 20,1 feet overall. The SeaArk DXS 1860 SLD 2013 comes in at 18,0 feet, making it roughly 2,1 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk BayFisher MVT 2013 or the SeaArk DXS 1860 SLD 2013?
For trailering, the SeaArk DXS 1860 SLD 2013 has the edge at 530 lbs dry weight versus 1 190 lbs for the SeaArk BayFisher MVT 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk BayFisher MVT 2013 is rated to a maximum of 140 hp, giving it the larger power ceiling. The SeaArk DXS 1860 SLD 2013 tops out at 60 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk BayFisher MVT 2013 is Coast Guard rated for 6 passengers, while the SeaArk DXS 1860 SLD 2013 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The SeaArk BayFisher MVT 2013 measures 95" wide, compared to 82" for the SeaArk DXS 1860 SLD 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk BayFisher MVT 2013 and SeaArk DXS 1860 SLD 2013 from the same manufacturer?
Yes - both the SeaArk BayFisher MVT 2013 and the SeaArk DXS 1860 SLD 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.