SeaArk BayFisher MVT 2010 boat specs
SeaArk
SeaArk BayFisher MVT 2010
2010
View full specs →
VS
SeaArk RiverCat (CC) Classic 2006 boat specs
SeaArk
SeaArk RiverCat (CC) Classic 2006
2006
View full specs →

SeaArk BayFisher MVT 2010 vs SeaArk RiverCat (CC) Classic 2006: Same Brand, Different Boat

The SeaArk BayFisher MVT 2010 vs SeaArk RiverCat (CC) Classic 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - SeaArk BayFisher MVT 2010 at 20,1 ft versus SeaArk RiverCat (CC) Classic 2006 at 20,0 ft. At 1 190 lbs and 1 190 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 140 hp, the SeaArk RiverCat (CC) Classic 2006 has a 25-hp advantage over the SeaArk BayFisher MVT 2010's 115-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 12 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the SeaArk RiverCat (CC) Classic 2006 and its 140-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the SeaArk BayFisher MVT 2010 with its 115-hp rating is the more economical daily driver.
General Boat Info
MakeSeaArk
MakeSeaArk
ModelBayFisher MVT
ModelRiverCat (CC) Classic
Model Year2010
Model Year2006
Measurements / Dimensions
Beam95 in. (2.41 m)
Beam95 in.
Beam - Meters2.41
Beam - Meters2.41
Beam - Inches95
Beam - Inches95
Depth - Detail28 in. (0.71 m)
Depth - Detail26 in.
Depth - Centimeters71.12
Depth - Centimeters66.04
Depth - Inches28
Depth - Inches26
Weight - Detail1,190 lbs. (539.8 kg)
Weight - Detail1,190 lbs.
Weight - kg539.77
Weight - kg539.77
Weight - lbs.1190
Weight - lbs.1190
Width [transom] - Detail72 in. (1.83 m)
Width [transom] - Detail72 in.
Height [transom]20 in. (0.51 m)
Height [transom]20 in.
Length - Feet20.08
Length - Feet20
Length overall - Detail20 ft. 1 in. (6.12 m)
Length overall - Detail20 ft. 1 in.
Length overall - Meters6.12
Length overall - Meters6.12
Length overall - Inches241
Length overall - Inches241
Length - Inchesnot available
Length - Inches1
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thickness0.125 in. (3.18 mm)
Hull thickness.125 in.
Hull typeTunnel
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max115 hp (84.6 kW)
Engine max140 hp
Operational Info
Maximum capacity2,300 lbs. (1,043.3 kg)
Maximum capacity2,300 lbs.
Maximum people12 / 1,715 lbs. (778 kg)
Maximum people12 people / 1,750 lbs.

SeaArk BayFisher MVT 2010 vs SeaArk RiverCat (CC) Classic 2006 - Common Questions

Which is the larger boat - the SeaArk BayFisher MVT 2010 or the SeaArk RiverCat (CC) Classic 2006?
The SeaArk BayFisher MVT 2010 is the longer of the two at 20,1 feet overall. The SeaArk RiverCat (CC) Classic 2006 comes in at 20,0 feet, making it roughly 0,1 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk BayFisher MVT 2010 or the SeaArk RiverCat (CC) Classic 2006?
For trailering, the SeaArk RiverCat (CC) Classic 2006 has the edge at 1 190 lbs dry weight versus 1 190 lbs for the SeaArk BayFisher MVT 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk RiverCat (CC) Classic 2006 is rated to a maximum of 140 hp, giving it the larger power ceiling. The SeaArk BayFisher MVT 2010 tops out at 115 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk BayFisher MVT 2010 is Coast Guard rated for 12 passengers, while the SeaArk RiverCat (CC) Classic 2006 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the SeaArk BayFisher MVT 2010 and SeaArk RiverCat (CC) Classic 2006 share an 95 in. (2.41 m) beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the SeaArk BayFisher MVT 2010 and SeaArk RiverCat (CC) Classic 2006 from the same manufacturer?
Yes - both the SeaArk BayFisher MVT 2010 and the SeaArk RiverCat (CC) Classic 2006 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.