SeaArk 2072P 2007 boat specs
SeaArk
SeaArk 2072P 2007
2007
View full specs →
VS
SeaArk ProCat 200 2013 boat specs
SeaArk
SeaArk ProCat 200 2013
2013
View full specs →

SeaArk 2072P 2007 vs SeaArk ProCat 200 2013: Same Brand, Different Boat

The SeaArk 2072P 2007 vs SeaArk ProCat 200 2013 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - SeaArk 2072P 2007 at 20,0 ft versus SeaArk ProCat 200 2013 at 20,1 ft. Weight tells a clearer story for trailering families: the SeaArk ProCat 200 2013 tips the scales at 1 480 lbs - 605 lbs less than the SeaArk 2072P 2007 at 875 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 175 hp, the SeaArk ProCat 200 2013 has a 35-hp advantage over the SeaArk 2072P 2007's 140-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The SeaArk 2072P 2007 is rated for 11 passengers, while the SeaArk ProCat 200 2013 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk 2072P 2007 could be the deciding factor.

Bottom line: Choose the SeaArk 2072P 2007 if your priority is putting more people on the water - it handles 11 passengers and at 20,0 ft it has the deck room to back that rating up comfortably. The SeaArk ProCat 200 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 6 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
Model2072P
ModelProCat 200
Model Year2007
Model Year2013
Measurements / Dimensions
Beam95 in.
Beam94 in.
Beam - Meters2.41
Beam - Meters2.39
Beam - Inches95
Beam - Inches94
Depth - Detail28 in.
Depth - Detail26 in.
Depth - Centimeters71.12
Depth - Centimeters66.04
Depth - Inches28
Depth - Inches26
Weight - Detail875 lbs.
Weight - Detail1,480 lbs.
Weight - kg396.89
Weight - kg671.32
Weight - lbs.875
Weight - lbs.1480
Width [transom] - Detail72 in.
Width [transom] - DetailBottom: 72 in.
Height [transom]20 in.
Height [transom]not available
Length - Feet20
Length - Feet20.08
Length overall - Detail20 ft. 0 in.
Length overall - Detail20 ft. 1 in.
Length overall - Meters6.1
Length overall - Meters6.12
Length overall - Inches240
Length overall - Inches241
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.125 in.
Hull thickness0.125 in.
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max140 hp
Engine max175 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail30 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal30
Operational Info
Maximum capacity2,300 lbs.
Maximum capacitynot available
Maximum people11
Maximum peoplenot available

SeaArk 2072P 2007 vs SeaArk ProCat 200 2013 - Common Questions

Which is the larger boat - the SeaArk 2072P 2007 or the SeaArk ProCat 200 2013?
The SeaArk ProCat 200 2013 is the longer of the two at 20,1 feet overall. The SeaArk 2072P 2007 comes in at 20,0 feet, making it roughly 0,1 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 2072P 2007 or the SeaArk ProCat 200 2013?
For trailering, the SeaArk 2072P 2007 has the edge at 875 lbs dry weight versus 1 480 lbs for the SeaArk ProCat 200 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk ProCat 200 2013 is rated to a maximum of 175 hp, giving it the larger power ceiling. The SeaArk 2072P 2007 tops out at 140 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 2072P 2007 is Coast Guard rated for 11 passengers, while the SeaArk ProCat 200 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The SeaArk 2072P 2007 measures 95" wide, compared to 94" for the SeaArk ProCat 200 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 2072P 2007 and SeaArk ProCat 200 2013 from the same manufacturer?
Yes - both the SeaArk 2072P 2007 and the SeaArk ProCat 200 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.