SeaArk 2072 Pro 2012 boat specs
SeaArk
SeaArk 2072 Pro 2012
2012
View full specs →
VS
SeaArk BayFisher MVT 2013 boat specs
SeaArk
SeaArk BayFisher MVT 2013
2013
View full specs →

SeaArk 2072 Pro 2012 vs SeaArk BayFisher MVT 2013: Same Brand, Different Boat

The SeaArk 2072 Pro 2012 is a modified-V design and the SeaArk BayFisher MVT 2013 is a tunnel hull design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk 2072 Pro 2012 at 20,1 ft versus SeaArk BayFisher MVT 2013 at 20,1 ft. Weight tells a clearer story for trailering families: the SeaArk BayFisher MVT 2013 tips the scales at 1 190 lbs - 240 lbs less than the SeaArk 2072 Pro 2012 at 950 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 140 hp for the SeaArk 2072 Pro 2012 and 140 hp for the SeaArk BayFisher MVT 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The SeaArk 2072 Pro 2012 and SeaArk BayFisher MVT 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeSeaArk
MakeSeaArk
Model2072 Pro
ModelBayFisher MVT
Model Year2012
Model Year2013
Measurements / Dimensions
Beam95 in.
Beam95 in.
Beam - Meters2.41
Beam - Meters2.41
Beam - Inches95
Beam - Inches95
Depth - Detail28 in.
Depth - Detail28 in.
Depth - Centimeters71.12
Depth - Centimeters71.12
Depth - Inches28
Depth - Inches28
Weight - Detail950 lbs.
Weight - Detail1,190 lbs.
Weight - kg430.91
Weight - kg539.77
Weight - lbs.950
Weight - lbs.1190
Width [transom] - DetailBottom: 72 in.
Width [transom] - DetailBottom: 72 in.
Length - Feet20.08
Length - Feet20.08
Length overall - Detail20 ft. 1 in.
Length overall - Detail20 ft. 1 in.
Length overall - Meters6.12
Length overall - Meters6.12
Length overall - Inches241
Length overall - Inches241
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.125 in.
Hull thickness0.125 in.
Hull typeModified Vee
Hull typeTunnel
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Engine max140 hp
Engine max140 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail30 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal30
Drive typenot available
Drive typeOutboard

SeaArk 2072 Pro 2012 vs SeaArk BayFisher MVT 2013 - Common Questions

Which is the larger boat - the SeaArk 2072 Pro 2012 or the SeaArk BayFisher MVT 2013?
The SeaArk BayFisher MVT 2013 is the longer of the two at 20,1 feet overall. The SeaArk 2072 Pro 2012 comes in at 20,1 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 2072 Pro 2012 or the SeaArk BayFisher MVT 2013?
For trailering, the SeaArk 2072 Pro 2012 has the edge at 950 lbs dry weight versus 1 190 lbs for the SeaArk BayFisher MVT 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The SeaArk 2072 Pro 2012 is Coast Guard rated for 6 passengers, while the SeaArk BayFisher MVT 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the SeaArk 2072 Pro 2012 and SeaArk BayFisher MVT 2013 share an 95 in. beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the SeaArk 2072 Pro 2012 and SeaArk BayFisher MVT 2013 from the same manufacturer?
Yes - both the SeaArk 2072 Pro 2012 and the SeaArk BayFisher MVT 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.