SeaArk 1660MV 2010 boat specs
SeaArk
SeaArk 1660MV 2010
2010
View full specs →
VS
SeaArk MV Jon 1542MV 2008 boat specs
SeaArk
SeaArk MV Jon 1542MV 2008
2008
View full specs →

SeaArk 1660MV 2010 vs SeaArk MV Jon 1542MV 2008: A Close Look at Two Modified-V Boats

Both the SeaArk 1660MV 2010 and the SeaArk MV Jon 1542MV 2008 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - SeaArk 1660MV 2010 at 16,0 ft versus SeaArk MV Jon 1542MV 2008 at 15,0 ft. Weight tells a clearer story for trailering families: the SeaArk 1660MV 2010 tips the scales at 475 lbs - 205 lbs more than the SeaArk MV Jon 1542MV 2008 at 270 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the SeaArk 1660MV 2010 has a 25-hp advantage over the SeaArk MV Jon 1542MV 2008's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The SeaArk 1660MV 2010 is rated for 6 passengers, while the SeaArk MV Jon 1542MV 2008 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk 1660MV 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1660MV 2010 comes in at 10 lbs per hp versus 11 lbs per hp for the SeaArk MV Jon 1542MV 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the SeaArk 1660MV 2010 if your priority is putting more people on the water - it handles 6 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The SeaArk MV Jon 1542MV 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1660MV
ModelMV Jon 1542MV
Model Year2010
Model Year2008
Measurements / Dimensions
Beam82 in. (2.08 m)
Beam61 in.
Beam - Meters2.08
Beam - Meters1.55
Beam - Inches82
Beam - Inches61
Depth - Detail24 in. (0.61 m)
Depth - Detail20 in.
Depth - Centimeters60.96
Depth - Centimeters50.8
Depth - Inches24
Depth - Inches20
Weight - Detail475 lbs. (215.5 kg)
Weight - Detail270 lbs.
Weight - kg215.46
Weight - kg122.47
Weight - lbs.475
Weight - lbs.270
Width [transom] - Detail60 in. (1.52 m)
Width [transom] - Detail42 in.
Height [transom]20 in. (0.51 m)
Height [transom]15 / 20 in.
Length - Feet16
Length - Feet15
Length overall - Detail16 ft. 0 in. (4.88 m)
Length overall - Detail15 ft. 0 in.
Length overall - Meters4.88
Length overall - Meters4.57
Length overall - Inches192
Length overall - Inches180
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in. (2.54 mm)
Hull thickness0.1
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 / 60 hp (37.3 / 44.7 kW)
Engine max25 hp
Operational Info
Maximum capacity1,250 lbs. (567 kg)
Maximum capacity730 lbs.
Maximum people6 / 835 lbs. (337.9 kg)
Maximum people4 / 465 lbs.

SeaArk 1660MV 2010 vs SeaArk MV Jon 1542MV 2008 - Common Questions

Which is the larger boat - the SeaArk 1660MV 2010 or the SeaArk MV Jon 1542MV 2008?
The SeaArk 1660MV 2010 is the longer of the two at 16,0 feet overall. The SeaArk MV Jon 1542MV 2008 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1660MV 2010 or the SeaArk MV Jon 1542MV 2008?
For trailering, the SeaArk MV Jon 1542MV 2008 has the edge at 270 lbs dry weight versus 475 lbs for the SeaArk 1660MV 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk 1660MV 2010 is rated to a maximum of 50 hp, giving it the larger power ceiling. The SeaArk MV Jon 1542MV 2008 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1660MV 2010 is Coast Guard rated for 6 passengers, while the SeaArk MV Jon 1542MV 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1660MV 2010 has a better power-to-weight ratio at 10 lbs per hp compared to 11 lbs per hp for the SeaArk MV Jon 1542MV 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk 1660MV 2010 measures 82" wide, compared to 61" for the SeaArk MV Jon 1542MV 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1660MV 2010 and SeaArk MV Jon 1542MV 2008 from the same manufacturer?
Yes - both the SeaArk 1660MV 2010 and the SeaArk MV Jon 1542MV 2008 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.