SeaArk 1652SLD 2011 boat specs
SeaArk
SeaArk 1652SLD 2011
2011
View full specs →
VS
SeaArk Cast & Blast 2005 boat specs
SeaArk
SeaArk Cast & Blast 2005
2005
View full specs →

SeaArk 1652SLD 2011 vs SeaArk Cast & Blast 2005 — Same Brand, Different Boat

The SeaArk 1652SLD 2011 vs SeaArk Cast & Blast 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — SeaArk 1652SLD 2011 at 16,0 ft versus SeaArk Cast & Blast 2005 at 15,0 ft. Weight tells a clearer story for trailering families: the SeaArk 1652SLD 2011 tips the scales at 425 lbs — 370 lbs more than the SeaArk Cast & Blast 2005 at 55 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 45 hp for the SeaArk 1652SLD 2011 and 40 hp for the SeaArk Cast & Blast 2005. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The SeaArk 1652SLD 2011 is rated for 5 passengers, while the SeaArk Cast & Blast 2005 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk 1652SLD 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk Cast & Blast 2005 comes in at 1 lbs per hp versus 9 lbs per hp for the SeaArk 1652SLD 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the SeaArk 1652SLD 2011 if your priority is putting more people on the water — it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The SeaArk Cast & Blast 2005 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1652SLD
ModelCast & Blast
Model Year2011
Model Year2005
Measurements / Dimensions
Beam72 in. (1.83 m)
Beam67 in. (1.7 m)
Beam - Meters1.83
Beam - Meters1.7
Beam - Inches72
Beam - Inches67
Depth - Detail20 in. (0.51 m)
Depth - Detail20 in. (.51 m))
Depth - Centimeters50.8
Depth - Centimeters50.8
Depth - Inches2
Depth - Inches2
Weight - Detail425 lbs. (192.8 kg)
Weight - Detail550 lbs. (249.5 kg)
Weight - kg192.78
Weight - kg249.48
Weight - lbs.425
Weight - lbs.55
Width [transom] - Detail52 in. (1.32 m)
Width [transom] - Detail48 in. (1.07 m)
Height [transom]15 / 20 in. (0.38 / 0.51 m)
Height [transom]20 in. (.51 m)
Length - Feet16
Length - Feet15
Length overall - Detail16 ft. (4.88 m)
Length overall - Detail15 ft. 0 in. (4.57 m)
Length overall - Meters4.88
Length overall - Meters4.57
Length overall - Inches192
Length overall - Inches18
Length - Metersnot available
Length - Meters4.57
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thickness0.100 in. (2.54 mm)
Hull thickness.100 in. (2.54 mm)
Hull typeModified Vee
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typeOutboard
Engine max45 hp (33.6 kW)
Engine max40 hp (29.8 kw)
Operational Info
Maximum capacity1,100 lbs. (499 kg)
Maximum capacity830 lbs. (376.1 kg)
Maximum people5 / 735 lbs. (333.4 kg)
Maximum people4

SeaArk 1652SLD 2011 vs SeaArk Cast & Blast 2005 — Common Questions

Which is the larger boat — the SeaArk 1652SLD 2011 or the SeaArk Cast & Blast 2005?
The SeaArk 1652SLD 2011 is the longer of the two at 16,0 feet overall. The SeaArk Cast & Blast 2005 comes in at 15,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the SeaArk 1652SLD 2011 or the SeaArk Cast & Blast 2005?
For trailering, the SeaArk Cast & Blast 2005 has the edge at 55 lbs dry weight versus 425 lbs for the SeaArk 1652SLD 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The SeaArk 1652SLD 2011 is Coast Guard rated for 5 passengers, while the SeaArk Cast & Blast 2005 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk Cast & Blast 2005 has a better power-to-weight ratio at 1 lbs per hp compared to 9 lbs per hp for the SeaArk 1652SLD 2011. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk 1652SLD 2011 measures 72" wide, compared to 67" for the SeaArk Cast & Blast 2005. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1652SLD 2011 and SeaArk Cast & Blast 2005 from the same manufacturer?
Yes — both the SeaArk 1652SLD 2011 and the SeaArk Cast & Blast 2005 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.