SeaArk 1652SLD 2009 boat specs
SeaArk
SeaArk 1652SLD 2009
2009
View full specs →
VS
SeaArk BayRunner MVT 180 2013 boat specs
SeaArk
SeaArk BayRunner MVT 180 2013
2013
View full specs →

SeaArk 1652SLD 2009 vs SeaArk BayRunner MVT 180 2013: Same Brand, Different Boat

The SeaArk 1652SLD 2009 is a modified-V design and the SeaArk BayRunner MVT 180 2013 is a tunnel hull design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk 1652SLD 2009 at 16,0 ft versus SeaArk BayRunner MVT 180 2013 at 18,0 ft. Weight tells a clearer story for trailering families: the SeaArk BayRunner MVT 180 2013 tips the scales at 1 193 lbs - 768 lbs less than the SeaArk 1652SLD 2009 at 425 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the SeaArk BayRunner MVT 180 2013 has a 70-hp advantage over the SeaArk 1652SLD 2009's 45-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1652SLD 2009 comes in at 9 lbs per hp versus 10 lbs per hp for the SeaArk BayRunner MVT 180 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the SeaArk BayRunner MVT 180 2013 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the SeaArk 1652SLD 2009 with its 45-hp rating is the more economical daily driver.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1652SLD
ModelBayRunner MVT 180
Model Year2009
Model Year2013
Measurements / Dimensions
Beam72 in.
Beam95 in.
Beam - Meters1.83
Beam - Meters2.41
Beam - Inches72
Beam - Inches95
Depth - Detail20 in.
Depth - Detail28 in.
Depth - Centimeters50.8
Depth - Centimeters71.12
Depth - Inches20
Depth - Inches28
Weight - Detail425 lbs.
Weight - Detail1,193 lbs.
Weight - kg192.78
Weight - kg541.14
Weight - lbs.425
Weight - lbs.1193
Width [transom] - Detail52 in.
Width [transom] - DetailBottom: 72 in.
Height [transom]20 in.
Height [transom]not available
Length - Feet16
Length - Feet18
Length overall - Detail16 ft. 0 in.
Length overall - Detail18 ft.
Length overall - Meters4.88
Length overall - Meters5.49
Length overall - Inches192
Length overall - Inches216
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.1
Hull thickness0.125 in.
Hull typeModified Vee
Hull typeTunnel
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max45 hp
Engine max115 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail30 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal30
Operational Info
Maximum capacity1,100 lbs.
Maximum capacitynot available
Maximum people5 / 735 lbs.
Maximum peoplenot available

SeaArk 1652SLD 2009 vs SeaArk BayRunner MVT 180 2013 - Common Questions

Which is the larger boat - the SeaArk 1652SLD 2009 or the SeaArk BayRunner MVT 180 2013?
The SeaArk BayRunner MVT 180 2013 is the longer of the two at 18,0 feet overall. The SeaArk 1652SLD 2009 comes in at 16,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1652SLD 2009 or the SeaArk BayRunner MVT 180 2013?
For trailering, the SeaArk 1652SLD 2009 has the edge at 425 lbs dry weight versus 1 193 lbs for the SeaArk BayRunner MVT 180 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk BayRunner MVT 180 2013 is rated to a maximum of 115 hp, giving it the larger power ceiling. The SeaArk 1652SLD 2009 tops out at 45 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1652SLD 2009 is Coast Guard rated for 5 passengers, while the SeaArk BayRunner MVT 180 2013 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1652SLD 2009 has a better power-to-weight ratio at 9 lbs per hp compared to 10 lbs per hp for the SeaArk BayRunner MVT 180 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk BayRunner MVT 180 2013 measures 95" wide, compared to 72" for the SeaArk 1652SLD 2009. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1652SLD 2009 and SeaArk BayRunner MVT 180 2013 from the same manufacturer?
Yes - both the SeaArk 1652SLD 2009 and the SeaArk BayRunner MVT 180 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.