SeaArk 1652MVT 2007 boat specs
SeaArk
SeaArk 1652MVT 2007
2007
View full specs →
VS
SeaArk 1652SLD 2011 boat specs
SeaArk
SeaArk 1652SLD 2011
2011
View full specs →

SeaArk 1652MVT 2007 vs SeaArk 1652SLD 2011 — Same Brand, Different Boat

The SeaArk 1652MVT 2007 vs SeaArk 1652SLD 2011 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — SeaArk 1652MVT 2007 at 16,0 ft versus SeaArk 1652SLD 2011 at 16,0 ft. At 345 lbs and 425 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 45 hp for the SeaArk 1652MVT 2007 and 45 hp for the SeaArk 1652SLD 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The SeaArk 1652MVT 2007 is rated for 6 passengers, while the SeaArk 1652SLD 2011 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk 1652MVT 2007 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1652MVT 2007 comes in at 8 lbs per hp versus 9 lbs per hp for the SeaArk 1652SLD 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the SeaArk 1652MVT 2007 if your priority is putting more people on the water — it handles 6 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The SeaArk 1652SLD 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1652MVT
Model1652SLD
Model Year2007
Model Year2011
Measurements / Dimensions
Beam72 in
Beam72 in. (1.83 m)
Beam - Meters1.83
Beam - Meters1.83
Beam - Inches72
Beam - Inches72
Depth - Detail20 in
Depth - Detail20 in. (0.51 m)
Depth - Centimeters50.8
Depth - Centimeters50.8
Depth - Inches2
Depth - Inches2
Weight - Detail345 lbs
Weight - Detail425 lbs. (192.8 kg)
Weight - kg156.49
Weight - kg192.78
Weight - lbs.345
Weight - lbs.425
Width [transom] - Detail52 in
Width [transom] - Detail52 in. (1.32 m)
Height [transom]20 in
Height [transom]15 / 20 in. (0.38 / 0.51 m)
Length - Feet16
Length - Feet16
Length overall - Detail16 ft. 0 in
Length overall - Detail16 ft. (4.88 m)
Length overall - Meters4.88
Length overall - Meters4.88
Length overall - Inches192
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in
Hull thickness0.100 in. (2.54 mm)
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max45 hp
Engine max45 hp (33.6 kW)
Operational Info
Maximum capacity1,100 lbs
Maximum capacity1,100 lbs. (499 kg)
Maximum people6
Maximum people5 / 735 lbs. (333.4 kg)

SeaArk 1652MVT 2007 vs SeaArk 1652SLD 2011 — Common Questions

Which is the larger boat — the SeaArk 1652MVT 2007 or the SeaArk 1652SLD 2011?
The SeaArk 1652SLD 2011 is the longer of the two at 16,0 feet overall. The SeaArk 1652MVT 2007 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the SeaArk 1652MVT 2007 or the SeaArk 1652SLD 2011?
For trailering, the SeaArk 1652MVT 2007 has the edge at 345 lbs dry weight versus 425 lbs for the SeaArk 1652SLD 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The SeaArk 1652MVT 2007 is Coast Guard rated for 6 passengers, while the SeaArk 1652SLD 2011 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1652MVT 2007 has a better power-to-weight ratio at 8 lbs per hp compared to 9 lbs per hp for the SeaArk 1652SLD 2011. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Do these boats require an oversize trailer permit to tow on US highways?
Both the SeaArk 1652MVT 2007 and SeaArk 1652SLD 2011 share an 72 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the SeaArk 1652MVT 2007 and SeaArk 1652SLD 2011 from the same manufacturer?
Yes — both the SeaArk 1652MVT 2007 and the SeaArk 1652SLD 2011 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.