SeaArk 1652 Crappie 2013 boat specs
SeaArk
SeaArk 1652 Crappie 2013
2013
View full specs →
VS
SeaArk BayRunner MVT 180 2012 boat specs
SeaArk
SeaArk BayRunner MVT 180 2012
2012
View full specs →

SeaArk 1652 Crappie 2013 vs SeaArk BayRunner MVT 180 2012: Same Brand, Different Boat

The SeaArk 1652 Crappie 2013 is a modified-V design and the SeaArk BayRunner MVT 180 2012 is a tunnel hull design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk 1652 Crappie 2013 at 16,0 ft versus SeaArk BayRunner MVT 180 2012 at 18,0 ft. Weight tells a clearer story for trailering families: the SeaArk BayRunner MVT 180 2012 tips the scales at 1 193 lbs - 593 lbs less than the SeaArk 1652 Crappie 2013 at 600 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the SeaArk BayRunner MVT 180 2012 has a 65-hp advantage over the SeaArk 1652 Crappie 2013's 50-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The SeaArk BayRunner MVT 180 2012 is rated for 5 passengers, while the SeaArk 1652 Crappie 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk BayRunner MVT 180 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk BayRunner MVT 180 2012 comes in at 10 lbs per hp versus 12 lbs per hp for the SeaArk 1652 Crappie 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the SeaArk BayRunner MVT 180 2012 if your priority is putting more people on the water - it handles 5 passengers and at 18,0 ft it has the deck room to back that rating up comfortably. The SeaArk 1652 Crappie 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1652 Crappie
ModelBayRunner MVT 180
Model Year2013
Model Year2012
Measurements / Dimensions
Beam72 in.
Beam95 in.
Beam - Meters1.83
Beam - Meters2.41
Beam - Inches72
Beam - Inches95
Depth - Detail20 in.
Depth - Detail28 in.
Depth - Centimeters50.8
Depth - Centimeters71.12
Depth - Inches20
Depth - Inches28
Weight - Detail600 lbs.
Weight - Detail1,193 lbs.
Weight - kg272.16
Weight - kg541.14
Weight - lbs.600
Weight - lbs.1193
Width [transom] - DetailBottom: 52 in.
Width [transom] - DetailBottom: 72 in.
Length - Feet16
Length - Feet18
Length overall - Detail16 ft.
Length overall - Detail18 ft.
Length overall - Meters4.88
Length overall - Meters5.49
Length overall - Inches192
Length overall - Inches216
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thickness0.125 in.
Hull typeModified Vee
Hull typeTunnel
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 hp
Engine max115 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail30 gal.
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters113.56
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal30

SeaArk 1652 Crappie 2013 vs SeaArk BayRunner MVT 180 2012 - Common Questions

Which is the larger boat - the SeaArk 1652 Crappie 2013 or the SeaArk BayRunner MVT 180 2012?
The SeaArk BayRunner MVT 180 2012 is the longer of the two at 18,0 feet overall. The SeaArk 1652 Crappie 2013 comes in at 16,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1652 Crappie 2013 or the SeaArk BayRunner MVT 180 2012?
For trailering, the SeaArk 1652 Crappie 2013 has the edge at 600 lbs dry weight versus 1 193 lbs for the SeaArk BayRunner MVT 180 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk BayRunner MVT 180 2012 is rated to a maximum of 115 hp, giving it the larger power ceiling. The SeaArk 1652 Crappie 2013 tops out at 50 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1652 Crappie 2013 is Coast Guard rated for 4 passengers, while the SeaArk BayRunner MVT 180 2012 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk BayRunner MVT 180 2012 has a better power-to-weight ratio at 10 lbs per hp compared to 12 lbs per hp for the SeaArk 1652 Crappie 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk BayRunner MVT 180 2012 measures 95" wide, compared to 72" for the SeaArk 1652 Crappie 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1652 Crappie 2013 and SeaArk BayRunner MVT 180 2012 from the same manufacturer?
Yes - both the SeaArk 1652 Crappie 2013 and the SeaArk BayRunner MVT 180 2012 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.