SeaArk 1652 Crappie 2011 boat specs
SeaArk
SeaArk 1652 Crappie 2011
2011
View full specs →
VS
SeaArk 1860 MVJT 2005 boat specs
SeaArk
SeaArk 1860 MVJT 2005
2005
View full specs →

SeaArk 1652 Crappie 2011 vs SeaArk 1860 MVJT 2005 — Same Brand, Different Boat

The SeaArk 1652 Crappie 2011 vs SeaArk 1860 MVJT 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — SeaArk 1652 Crappie 2011 at 16,0 ft versus SeaArk 1860 MVJT 2005 at 18,0 ft. At 6 lbs and 5 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 50 hp for the SeaArk 1652 Crappie 2011 and 60 hp for the SeaArk 1860 MVJT 2005. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The SeaArk 1860 MVJT 2005 is rated for 7 passengers, while the SeaArk 1652 Crappie 2011 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the SeaArk 1860 MVJT 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1860 MVJT 2005 comes in at 0 lbs per hp versus 0 lbs per hp for the SeaArk 1652 Crappie 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the SeaArk 1860 MVJT 2005 if your priority is putting more people on the water — it handles 7 passengers and at 18,0 ft it has the deck room to back that rating up comfortably. The SeaArk 1652 Crappie 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1652 Crappie
Model1860 MVJT
Model Year2011
Model Year2005
Measurements / Dimensions
Beam72 in. (1.83 m)
Beam82 in. (2.08 m)
Beam - Meters1.83
Beam - Meters2.08
Beam - Inches72
Beam - Inches82
Depth - Detail20 in. (0.51 m)
Depth - Detail24 in. (.61 m)
Depth - Centimeters50.8
Depth - Centimeters60.96
Depth - Inches2
Depth - Inches24
Weight - Detail600 lbs. (272.2 kg)
Weight - Detail500 lbs. (226.8 kg)
Weight - kg272.16
Weight - kg226.8
Weight - lbs.6
Weight - lbs.5
Width [transom] - Detail52 in. (1.32 m)
Width [transom] - Detail60 in. (1.52 m)
Height [transom]20 in. (0.51 m)
Height [transom]20 in. (.51 m)
Length - Feet16
Length - Feet18
Length overall - Detail16 ft. (4.88 m)
Length overall - Detail18 ft. 0 in. (5.49 m)
Length overall - Meters4.88
Length overall - Meters5.49
Length overall - Inches192
Length overall - Inches216
Length - Metersnot available
Length - Meters5.49
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thickness0.100 in. (2.54 mm)
Hull thickness.100 in. (2.54 mm)
Hull typeModified Vee
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typeOutboard
Horsepower50 hp (37.3 kW)
Horsepowernot available
Engine maxnot available
Engine max60 hp (44.7 kw)
Operational Info
Maximum capacity1,100 lbs. (499 kg)
Maximum capacity1,350 lbs. (612.4 kg)
Maximum people5 / 710 lbs. (322.7 kg)
Maximum people7

SeaArk 1652 Crappie 2011 vs SeaArk 1860 MVJT 2005 — Common Questions

Which is the larger boat — the SeaArk 1652 Crappie 2011 or the SeaArk 1860 MVJT 2005?
The SeaArk 1860 MVJT 2005 is the longer of the two at 18,0 feet overall. The SeaArk 1652 Crappie 2011 comes in at 16,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the SeaArk 1652 Crappie 2011 or the SeaArk 1860 MVJT 2005?
For trailering, the SeaArk 1860 MVJT 2005 has the edge at 5 lbs dry weight versus 6 lbs for the SeaArk 1652 Crappie 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk 1860 MVJT 2005 is rated to a maximum of 60 hp, giving it the larger power ceiling. The SeaArk 1652 Crappie 2011 tops out at 50 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1652 Crappie 2011 is Coast Guard rated for 5 passengers, while the SeaArk 1860 MVJT 2005 is certified for 7. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1860 MVJT 2005 has a better power-to-weight ratio at 0 lbs per hp compared to 0 lbs per hp for the SeaArk 1652 Crappie 2011. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk 1860 MVJT 2005 measures 82" wide, compared to 72" for the SeaArk 1652 Crappie 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1652 Crappie 2011 and SeaArk 1860 MVJT 2005 from the same manufacturer?
Yes — both the SeaArk 1652 Crappie 2011 and the SeaArk 1860 MVJT 2005 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.