SeaArk 1648MV 2011 boat specs
SeaArk
SeaArk 1648MV 2011
2011
View full specs →
VS
SeaArk 1872MVJT 2013 boat specs
SeaArk
SeaArk 1872MVJT 2013
2013
View full specs →

SeaArk 1648MV 2011 vs SeaArk 1872MVJT 2013: Same Brand, Different Boat

The SeaArk 1648MV 2011 is a modified-V design and the SeaArk 1872MVJT 2013 is a tunnel hull design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk 1648MV 2011 at 16,0 ft versus SeaArk 1872MVJT 2013 at 18,0 ft. Weight tells a clearer story for trailering families: the SeaArk 1872MVJT 2013 tips the scales at 750 lbs - 410 lbs less than the SeaArk 1648MV 2011 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 80 hp, the SeaArk 1872MVJT 2013 has a 40-hp advantage over the SeaArk 1648MV 2011's 40-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1648MV 2011 comes in at 9 lbs per hp versus 9 lbs per hp for the SeaArk 1872MVJT 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the SeaArk 1872MVJT 2013 and its 80-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the SeaArk 1648MV 2011 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1648MV
Model1872MVJT
Model Year2011
Model Year2013
Measurements / Dimensions
Beam67 in. (1.70 m)
Beam95 in.
Beam - Meters1.7
Beam - Meters2.41
Beam - Inches67
Beam - Inches95
Depth - Detail20 in. (0.51 m)
Depth - Detail28 in.
Depth - Centimeters50.8
Depth - Centimeters71.12
Depth - Inches20
Depth - Inches28
Weight - Detail340 lbs. (154.2 kg)
Weight - Detail750 lbs.
Weight - kg154.22
Weight - kg340.19
Weight - lbs.340
Weight - lbs.750
Width [transom] - Detail48 in. (1.22 m)
Width [transom] - DetailBottom: 72 in.
Height [transom]15 / 20 in. (0.38 / 0.51 m)
Height [transom]not available
Length - Feet16
Length - Feet18
Length overall - Detail16 ft. (4.88 m)
Length overall - Detail18 ft.
Length overall - Meters4.88
Length overall - Meters5.49
Length overall - Inches192
Length overall - Inches216
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in. (2.54 mm)
Hull thickness0.125 in.
Hull typeModified Vee
Hull typeTunnel
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typenot available
Engine max40 hp (29.8 kW)
Engine max80 / 140 hp (JT 80 hp)
Operational Info
Maximum capacity985 lbs. (446.8 kg)
Maximum capacitynot available
Maximum people5 / 630 lbs. (303.9 kg)
Maximum peoplenot available

SeaArk 1648MV 2011 vs SeaArk 1872MVJT 2013 - Common Questions

Which is the larger boat - the SeaArk 1648MV 2011 or the SeaArk 1872MVJT 2013?
The SeaArk 1872MVJT 2013 is the longer of the two at 18,0 feet overall. The SeaArk 1648MV 2011 comes in at 16,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1648MV 2011 or the SeaArk 1872MVJT 2013?
For trailering, the SeaArk 1648MV 2011 has the edge at 340 lbs dry weight versus 750 lbs for the SeaArk 1872MVJT 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk 1872MVJT 2013 is rated to a maximum of 80 hp, giving it the larger power ceiling. The SeaArk 1648MV 2011 tops out at 40 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1648MV 2011 is Coast Guard rated for 5 passengers, while the SeaArk 1872MVJT 2013 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1648MV 2011 has a better power-to-weight ratio at 9 lbs per hp compared to 9 lbs per hp for the SeaArk 1872MVJT 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk 1872MVJT 2013 measures 95" wide, compared to 67" for the SeaArk 1648MV 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1648MV 2011 and SeaArk 1872MVJT 2013 from the same manufacturer?
Yes - both the SeaArk 1648MV 2011 and the SeaArk 1872MVJT 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.