SeaArk 1548SLD 2010 boat specs
SeaArk
SeaArk 1548SLD 2010
2010
View full specs →
VS
SeaArk DXS 1542 DKLD 2012 boat specs
SeaArk
SeaArk DXS 1542 DKLD 2012
2012
View full specs →

SeaArk 1548SLD 2010 vs SeaArk DXS 1542 DKLD 2012: A Close Look at Two Modified-V Boats

Both the SeaArk 1548SLD 2010 and the SeaArk DXS 1542 DKLD 2012 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - SeaArk 1548SLD 2010 at 15,0 ft versus SeaArk DXS 1542 DKLD 2012 at 15,0 ft. At 355 lbs and 300 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 40 hp for the SeaArk 1548SLD 2010 and 25 hp for the SeaArk DXS 1542 DKLD 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1548SLD 2010 comes in at 9 lbs per hp versus 12 lbs per hp for the SeaArk DXS 1542 DKLD 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The SeaArk 1548SLD 2010 and SeaArk DXS 1542 DKLD 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1548SLD
ModelDXS 1542 DKLD
Model Year2010
Model Year2012
Measurements / Dimensions
Beam67 in. (1.70 m)
Beam61 in.
Beam - Meters1.7
Beam - Meters1.55
Beam - Inches67
Beam - Inches61
Depth - Detail20 in. (0.51 m)
Depth - Detail20 in.
Depth - Centimeters50.8
Depth - Centimeters50.8
Depth - Inches20
Depth - Inches20
Weight - Detail355 lbs. (161 kg)
Weight - Detail300 lbs.
Weight - kg161.03
Weight - kg136.08
Weight - lbs.355
Weight - lbs.300
Width [transom] - Detail48 in. (1.22 m)
Width [transom] - DetailBottom: 42 in.
Height [transom]15 / 20 in. (0.38 / 0.51 m)
Height [transom]not available
Length - Feet15
Length - Feet15
Length overall - Detail15 ft. 0 in. (4.57 m)
Length overall - Detail15 ft.
Length overall - Meters4.57
Length overall - Meters4.57
Length overall - Inches180
Length overall - Inches180
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in. (2.54 mm)
Hull thickness0.100 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max40 hp (29.8 kW)
Engine max25 hp
Operational Info
Maximum capacity830 lbs. (376.5 kg)
Maximum capacitynot available
Maximum people4 / 465 lbs. (210.9 kg)
Maximum peoplenot available

SeaArk 1548SLD 2010 vs SeaArk DXS 1542 DKLD 2012 - Common Questions

Which is the larger boat - the SeaArk 1548SLD 2010 or the SeaArk DXS 1542 DKLD 2012?
The SeaArk DXS 1542 DKLD 2012 is the longer of the two at 15,0 feet overall. The SeaArk 1548SLD 2010 comes in at 15,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1548SLD 2010 or the SeaArk DXS 1542 DKLD 2012?
For trailering, the SeaArk DXS 1542 DKLD 2012 has the edge at 300 lbs dry weight versus 355 lbs for the SeaArk 1548SLD 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk 1548SLD 2010 is rated to a maximum of 40 hp, giving it the larger power ceiling. The SeaArk DXS 1542 DKLD 2012 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1548SLD 2010 is Coast Guard rated for 4 passengers, while the SeaArk DXS 1542 DKLD 2012 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1548SLD 2010 has a better power-to-weight ratio at 9 lbs per hp compared to 12 lbs per hp for the SeaArk DXS 1542 DKLD 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk 1548SLD 2010 measures 67" wide, compared to 61" for the SeaArk DXS 1542 DKLD 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1548SLD 2010 and SeaArk DXS 1542 DKLD 2012 from the same manufacturer?
Yes - both the SeaArk 1548SLD 2010 and the SeaArk DXS 1542 DKLD 2012 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.