SeaArk 1542MV 2010 boat specs
SeaArk
SeaArk 1542MV 2010
2010
View full specs →
VS
SeaArk DXS 1652 SLD 2013 boat specs
SeaArk
SeaArk DXS 1652 SLD 2013
2013
View full specs →

SeaArk 1542MV 2010 vs SeaArk DXS 1652 SLD 2013: A Close Look at Two Modified-V Boats

Both the SeaArk 1542MV 2010 and the SeaArk DXS 1652 SLD 2013 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - SeaArk 1542MV 2010 at 15,0 ft versus SeaArk DXS 1652 SLD 2013 at 16,0 ft. Weight tells a clearer story for trailering families: the SeaArk DXS 1652 SLD 2013 tips the scales at 425 lbs - 155 lbs less than the SeaArk 1542MV 2010 at 270 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 25 hp for the SeaArk 1542MV 2010 and 45 hp for the SeaArk DXS 1652 SLD 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk DXS 1652 SLD 2013 comes in at 9 lbs per hp versus 11 lbs per hp for the SeaArk 1542MV 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the SeaArk DXS 1652 SLD 2013 and its 45-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the SeaArk 1542MV 2010 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1542MV
ModelDXS 1652 SLD
Model Year2010
Model Year2013
Measurements / Dimensions
Beam61 in. (1.55 m)
Beam72 in.
Beam - Meters1.55
Beam - Meters1.83
Beam - Inches61
Beam - Inches72
Depth - Detail20 in. (0.51 m)
Depth - Detail20 in.
Depth - Centimeters50.8
Depth - Centimeters50.8
Depth - Inches20
Depth - Inches20
Weight - Detail270 lbs. (122.5 kg)
Weight - Detail425 lbs.
Weight - kg122.47
Weight - kg192.78
Weight - lbs.270
Weight - lbs.425
Width [transom] - Detail42 in. (1.07 m)
Width [transom] - DetailBottom: 52 in.
Height [transom]15 / 20 in. (0.38 / 0.51 m)
Height [transom]not available
Length - Feet15
Length - Feet16
Length overall - Detail15 ft. 0 in. (4.57 m)
Length overall - Detail16 ft.
Length overall - Meters4.57
Length overall - Meters4.88
Length overall - Inches180
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in. (2.54 mm)
Hull thickness0.100 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp (18.6 kW)
Engine max45 hp
Operational Info
Maximum capacity730 lbs. (331.1 kg)
Maximum capacitynot available
Maximum people4 / 465 lbs. (210.9 kg)
Maximum peoplenot available

SeaArk 1542MV 2010 vs SeaArk DXS 1652 SLD 2013 - Common Questions

Which is the larger boat - the SeaArk 1542MV 2010 or the SeaArk DXS 1652 SLD 2013?
The SeaArk DXS 1652 SLD 2013 is the longer of the two at 16,0 feet overall. The SeaArk 1542MV 2010 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1542MV 2010 or the SeaArk DXS 1652 SLD 2013?
For trailering, the SeaArk 1542MV 2010 has the edge at 270 lbs dry weight versus 425 lbs for the SeaArk DXS 1652 SLD 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk DXS 1652 SLD 2013 is rated to a maximum of 45 hp, giving it the larger power ceiling. The SeaArk 1542MV 2010 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1542MV 2010 is Coast Guard rated for 4 passengers, while the SeaArk DXS 1652 SLD 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk DXS 1652 SLD 2013 has a better power-to-weight ratio at 9 lbs per hp compared to 11 lbs per hp for the SeaArk 1542MV 2010. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk DXS 1652 SLD 2013 measures 72" wide, compared to 61" for the SeaArk 1542MV 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1542MV 2010 and SeaArk DXS 1652 SLD 2013 from the same manufacturer?
Yes - both the SeaArk 1542MV 2010 and the SeaArk DXS 1652 SLD 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.