SeaArk 1542MV Jon 2012 boat specs
SeaArk
SeaArk 1542MV Jon 2012
2012
View full specs →
VS
SeaArk 1660MVJT 2013 boat specs
SeaArk
SeaArk 1660MVJT 2013
2013
View full specs →

SeaArk 1542MV Jon 2012 vs SeaArk 1660MVJT 2013: Same Brand, Different Boat

The SeaArk 1542MV Jon 2012 is a modified-V design and the SeaArk 1660MVJT 2013 is a tunnel hull design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - SeaArk 1542MV Jon 2012 at 15,0 ft versus SeaArk 1660MVJT 2013 at 16,0 ft. Weight tells a clearer story for trailering families: the SeaArk 1660MVJT 2013 tips the scales at 475 lbs - 205 lbs less than the SeaArk 1542MV Jon 2012 at 270 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the SeaArk 1660MVJT 2013 has a 25-hp advantage over the SeaArk 1542MV Jon 2012's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The SeaArk 1660MVJT 2013 comes in at 10 lbs per hp versus 11 lbs per hp for the SeaArk 1542MV Jon 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the SeaArk 1660MVJT 2013 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the SeaArk 1542MV Jon 2012 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeSeaArk
MakeSeaArk
Model1542MV Jon
Model1660MVJT
Model Year2012
Model Year2013
Measurements / Dimensions
Beam61 in.
Beam82 in.
Beam - Meters1.55
Beam - Meters2.08
Beam - Inches61
Beam - Inches82
Depth - Detail20 in.
Depth - Detail24 in.
Depth - Centimeters50.8
Depth - Centimeters60.96
Depth - Inches20
Depth - Inches24
Weight - Detail270 lbs.
Weight - Detail475 lbs.
Weight - kg122.47
Weight - kg215.46
Weight - lbs.270
Weight - lbs.475
Width [transom] - DetailBottom: 42 in.
Width [transom] - DetailBottom: 60 in.
Length - Feet15
Length - Feet16
Length overall - Detail15 ft.
Length overall - Detail16 ft.
Length overall - Meters4.57
Length overall - Meters4.88
Length overall - Inches180
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 in.
Hull thickness0.100 in.
Hull typeModified Vee
Hull typeTunnel
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Engine max25 hp
Engine max50 / 60 hp (JT 50 hp)

SeaArk 1542MV Jon 2012 vs SeaArk 1660MVJT 2013 - Common Questions

Which is the larger boat - the SeaArk 1542MV Jon 2012 or the SeaArk 1660MVJT 2013?
The SeaArk 1660MVJT 2013 is the longer of the two at 16,0 feet overall. The SeaArk 1542MV Jon 2012 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the SeaArk 1542MV Jon 2012 or the SeaArk 1660MVJT 2013?
For trailering, the SeaArk 1542MV Jon 2012 has the edge at 270 lbs dry weight versus 475 lbs for the SeaArk 1660MVJT 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The SeaArk 1660MVJT 2013 is rated to a maximum of 50 hp, giving it the larger power ceiling. The SeaArk 1542MV Jon 2012 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The SeaArk 1542MV Jon 2012 is Coast Guard rated for 4 passengers, while the SeaArk 1660MVJT 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The SeaArk 1660MVJT 2013 has a better power-to-weight ratio at 10 lbs per hp compared to 11 lbs per hp for the SeaArk 1542MV Jon 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The SeaArk 1660MVJT 2013 measures 82" wide, compared to 61" for the SeaArk 1542MV Jon 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the SeaArk 1542MV Jon 2012 and SeaArk 1660MVJT 2013 from the same manufacturer?
Yes - both the SeaArk 1542MV Jon 2012 and the SeaArk 1660MVJT 2013 are built by SeaArk. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.