Sea Ray 350 Sundancer 2010 boat specs
Sea Ray
Sea Ray 350 Sundancer 2010
2010
View full specs →
VS
Sea Ray 350 Sundancer 2011 boat specs
Sea Ray
Sea Ray 350 Sundancer 2011
2011
View full specs →

Sea Ray 350 Sundancer 2010 vs Sea Ray 350 Sundancer 2011 — A Close Look at Two Deep Vees

When two boats share the same hull type — in this case both the Sea Ray 350 Sundancer 2010 and the Sea Ray 350 Sundancer 2011 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Sea Ray 350 Sundancer 2010 at 35,5 ft versus Sea Ray 350 Sundancer 2011 at 35,5 ft. At 154 lbs and 154 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 375 hp for the Sea Ray 350 Sundancer 2010 and 375 hp for the Sea Ray 350 Sundancer 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 225 gal and 225 gal — so range won't be a tiebreaker here.

Both boats are rated for 10 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Sea Ray 350 Sundancer 2010 and Sea Ray 350 Sundancer 2011 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeSea Ray
MakeSea Ray
Model350 Sundancer?
Model350 Sundancer?
Model Year201
Model Year2011
Measurements / Dimensions
Beam11 ft. 6 in. (3.50 m)
Beam11 ft. 6 in. (3.50 m)
Beam - Meters3.51
Beam - Meters3.51
Beam - Inches138
Beam - Inches138
Deadrise21℃
Deadrise21℃
Draft [drive up] - Detail33 in. (83.8 cm)
Draft [drive up] - Detail33 in. (83.8 cm)
Draft [drive up] meters0.84
Draft [drive up] meters0.84
Draft [drive up] inches33
Draft [drive up] inches33
Draft [max] - Detail43 in. (109 cm) Inboards: 33 in. (83.8 cm)
Draft [max] - Detail43 in. (109.2 cm) Inboards: 33 in. (83.8 cm)
Draft [max] - Meters1.09
Draft [max] - Meters1.09
Draft [max] - Inches43
Draft [max] - Inches43
Weight - Detail15,400 lbs. (6,985 kg)
Weight - Detail15,400 lbs. (6,985 kg)
Weight - kg6985.32
Weight - kg6985.32
Weight - lbs.154
Weight - lbs.154
Length - Feet35.5
Length - Feet35.5
Length overall - Detail35 ft. 6 in. (10.82 m)
Length overall - Detail35 ft. 6 in. (10.82 m)
Length overall - Meters10.82
Length overall - Meters10.82
Length overall - Inches426
Length overall - Inches426
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine makeMerCruiser®
Engine makeMerCruiser®
Engine/s standardT-377 MPI Axius BR 3
Engine/s standardTwin 377 MAG ECT with DTS Bravo® III sterndrives
Fuel tank capacity - Detail225 gal. (852 l)
Fuel tank capacity - Detail225 gal. (851.7 l)
Fuel tank capacity - Liters851.72
Fuel tank capacity - Liters851.72
Fuel tank capacity - Gal225
Fuel tank capacity - Gal225
Fuel typeGas or Diesel
Fuel typeGas or Diesel
Drive typeI/O - Twin
Drive typeI/O - Twin
HorsepowerTwin 320 hp (235 kW)
HorsepowerTwin 320 hp (235 kW)
Engine maxTwin 375 hp (280 kW)
Engine maxTwin 375 hp (280 kW)
Operational Info
Water capacity40 gal. (151 l)
Water capacity40 gal. (151.4 l)
Holding tank capacity - Detail28 gal. (106 l)
Holding tank capacity - Detail28 gal. (106 l)
Holding tank capacity - Liters105.99
Holding tank capacity - Liters105.99
Holding tank capacity - Gal28
Holding tank capacity - Gal28

Sea Ray 350 Sundancer 2010 vs Sea Ray 350 Sundancer 2011 — Common Questions

Which is the larger boat — the Sea Ray 350 Sundancer 2010 or the Sea Ray 350 Sundancer 2011?
The Sea Ray 350 Sundancer 2011 is the longer of the two at 35,5 feet overall. The Sea Ray 350 Sundancer 2010 comes in at 35,5 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Sea Ray 350 Sundancer 2010 or the Sea Ray 350 Sundancer 2011?
For trailering, the Sea Ray 350 Sundancer 2011 has the edge at 154 lbs dry weight versus 154 lbs for the Sea Ray 350 Sundancer 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Sea Ray 350 Sundancer 2010 is Coast Guard rated for 10 passengers, while the Sea Ray 350 Sundancer 2011 is certified for 10. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Sea Ray 350 Sundancer 2010 and Sea Ray 350 Sundancer 2011 share an 11 ft. 6 in. (3.50 m) beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
How do the fuel tanks compare on the Sea Ray 350 Sundancer 2010 and Sea Ray 350 Sundancer 2011?
Both boats carry similar fuel loads — 225 gallons and 225 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Sea Ray 350 Sundancer 2010 and Sea Ray 350 Sundancer 2011 from the same manufacturer?
Yes — both the Sea Ray 350 Sundancer 2010 and the Sea Ray 350 Sundancer 2011 are built by Sea Ray. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.