Detailed Evaluation & Buyer Recommendation
Scout 262 Abaco 2010 vs Scout 350 Abaco 2012 — Which Deep Vee Fits Your Needs?
When two boats share the same hull type — in this case both the Scout 262 Abaco 2010 and the Scout 350 Abaco 2012 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
Size is the most obvious dividing line here. The Scout 350 Abaco 2012 measures 38,8 feet overall (2012), giving it roughly 12,7 additional feet of deck space compared to the Scout 262 Abaco 2010 at 26,2 feet (2010). At 48 lbs and 134 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 700 hp, the Scout 350 Abaco 2012 has a 400-hp advantage over the Scout 262 Abaco 2010's 300-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Scout 350 Abaco 2012 carries 33 gallons versus 13 gallons in the Scout 262 Abaco 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Scout 350 Abaco 2012 is rated for 11 passengers, while the Scout 262 Abaco 2010 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Scout 350 Abaco 2012 could be the deciding factor.
Bottom line: Choose the Scout 350 Abaco 2012 if your priority is putting more people on the water — it handles 11 passengers and at 38,8 ft it has the deck room to back that rating up comfortably. The Scout 262 Abaco 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 7 that costs less to run day-to-day.
General Boat Info
Model262 Abaco
Model350 Abaco
Model Year201
Model Year2012
Measurements / Dimensions
Beam8 ft. 10 in
Beam11 ft. 11 in. (3.6 m)
Beam - Meters2.69
Beam - Meters3.63
Beam - Inches106
Beam - Inches143
Deadrise21℃
Deadrise22°
Draft [max] - Detail15 in
Draft [max] - Detail26 in. (0.7 m)
Draft [max] - Meters0.38
Draft [max] - Meters0.66
Draft [max] - Inches15
Draft [max] - Inches26
Weight - Detail4,800 lbs. without engines
Weight - Detail13,400 lbs. (6,078 kg) with twin engines
Weight - kg2177.24
Weight - kg6078.13
Weight - lbs.48
Weight - lbs.134
Length - Feet26.17
Length - Feet38.83
Length overall - Detail26 ft. 2 in
Length overall - Detail38 ft. 10 in. (11.8 m) 35 ft. 10 in. (10.9 m) without pulpit
Length overall - Meters7.98
Length overall - Meters11.84
Length overall - Inches314
Length overall - Inches466
Bridge clearance - Detailnot available
Bridge clearance - Detail10 ft. (3 m) without radar
Bridge clearance - Metersnot available
Bridge clearance - Meters3.05
Bridge clearance - Inchesnot available
Bridge clearance - Inches12
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail130 gal
Fuel tank capacity - Detail330 gal. (1,249 l)
Fuel tank capacity - Liters492.1
Fuel tank capacity - Liters1249.19
Fuel tank capacity - Gal13
Fuel tank capacity - Gal33
Drive typeOutboard - Twin
Drive typeOutboard - Twin
Engine max300 hp
Engine max700 hp (522.2 kW)
Operational Info
Headnot available
HeadFully enclosed
Headroomnot available
Headroom6 ft. 4 in
Water capacitynot available
Water capacity60 gal. (227 l)
Water heater capacitynot available
Water heater capacity11 gal. (42 l)
Holding tank capacity - Detailnot available
Holding tank capacity - Detail21 gal. (79.5 l)
Holding tank capacity - Litersnot available
Holding tank capacity - Liters79.49
Holding tank capacity - Galnot available
Holding tank capacity - Gal21