Detailed Evaluation & Buyer Recommendation
Scout 245 XSF 2013 vs Scout 295 Abaco 2010 — Which Deep Vee Fits Your Needs?
When two boats share the same hull type — in this case both the Scout 245 XSF 2013 and the Scout 295 Abaco 2010 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
Size is the most obvious dividing line here. The Scout 295 Abaco 2010 measures 30,8 feet overall (2010), giving it roughly 6,4 additional feet of deck space compared to the Scout 245 XSF 2013 at 24,4 feet (2013). At 26 lbs and 95 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 600 hp, the Scout 295 Abaco 2010 has a 300-hp advantage over the Scout 245 XSF 2013's 300-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Scout 245 XSF 2013 carries 125 gallons versus 2 gallons in the Scout 295 Abaco 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Scout 295 Abaco 2010 is rated for 9 passengers, while the Scout 245 XSF 2013 caps at 1. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Scout 295 Abaco 2010 could be the deciding factor.
Bottom line: Choose the Scout 295 Abaco 2010 if your priority is putting more people on the water — it handles 9 passengers and at 30,8 ft it has the deck room to back that rating up comfortably. The Scout 245 XSF 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 1 that costs less to run day-to-day.
General Boat Info
Model245 XSF
Model295 Abaco
Model Year2013
Model Year201
Measurements / Dimensions
Beam8 ft. 6 in. (2.6 m)
Beam9 ft. 6 in
Beam - Meters2.59
Beam - Meters2.9
Beam - Inches102
Beam - Inches114
Bridge clearance - Detail6 ft. 3 in. With T-top / Hardtop: 8 ft. 8 in. (2.6 m) With T-top / Hardtop & Outriggers: 9 ft. 5 in. (2.9 m)
Bridge clearance - Detailnot available
Bridge clearance - Meters2.87
Bridge clearance - Metersnot available
Bridge clearance - Inches113
Bridge clearance - Inchesnot available
Deadrise20°
Deadrise22°
Draft [max] - Detail17 in. (0.4 m)
Draft [max] - Detail20 in
Draft [max] - Meters0.43
Draft [max] - Meters0.51
Draft [max] - Inches17
Draft [max] - Inches2
Weight - Detail2,600 lbs. (1,179 kg) without engines
Weight - Detail9,500 lbs. without engines
Weight - kg1179.34
Weight - kg4309.12
Weight - lbs.26
Weight - lbs.95
Length - Feet24.42
Length - Feet30.83
Length overall - Detail24 ft. 5 in. (7.4 m)
Length overall - Detail30 ft. 10 in
Length overall - Meters7.44
Length overall - Meters9.4
Length overall - Inches293
Length overall - Inches37
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail125 gal. (473 l)
Fuel tank capacity - Detail200 gal
Fuel tank capacity - Liters473.18
Fuel tank capacity - Liters757.08
Fuel tank capacity - Gal125
Fuel tank capacity - Gal2
Drive typeOutboard
Drive typeOutboard - Twin
Horsepower250 hp (187 kW)
Horsepowernot available
Engine max300 hp (224 kW)
Engine max600 hp
Operational Info
Water capacity15 gal. (57 l)
Water capacity25 gal
Maximum people1
Maximum peoplenot available
Holding tank capacity - Detail10 gal. (38 l)
Holding tank capacity - Detailnot available
Holding tank capacity - Liters37.85
Holding tank capacity - Litersnot available
Holding tank capacity - Gal1
Holding tank capacity - Galnot available