The RM Yachts RM 1180 Fin keel Fin keel 2019 vs RM Yachts RM 1360 Fin keel Fin keel 2013 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — RM Yachts RM 1180 Fin keel Fin keel 2019 at 42,1 ft versus RM Yachts RM 1360 Fin keel Fin keel 2013 at 44,7 ft. Weight tells a clearer story for trailering families: the RM Yachts RM 1360 Fin keel Fin keel 2013 tips the scales at 27 558 lbs — 12 126 lbs less than the RM Yachts RM 1180 Fin keel Fin keel 2019 at 15 432 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 75 hp, the RM Yachts RM 1360 Fin keel Fin keel 2013 has a 25-hp advantage over the RM Yachts RM 1180 Fin keel Fin keel 2019's 50-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the RM Yachts RM 1360 Fin keel Fin keel 2013 carries 87 gallons versus 28 gallons in the RM Yachts RM 1180 Fin keel Fin keel 2019. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The RM Yachts RM 1360 Fin keel Fin keel 2013 is rated for 13 passengers, while the RM Yachts RM 1180 Fin keel Fin keel 2019 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the RM Yachts RM 1360 Fin keel Fin keel 2013 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The RM Yachts RM 1360 Fin keel Fin keel 2013 displaces 27 558 lbs — a 12 126-lb difference over the RM Yachts RM 1180 Fin keel Fin keel 2019 at 15 432 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 7,5 ft and 8,0 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The RM Yachts RM 1180 Fin keel Fin keel 2019 is rigged as a Sloop while the RM Yachts RM 1360 Fin keel Fin keel 2013 carries cutter rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. For auxiliary power the RM Yachts RM 1360 Fin keel Fin keel 2013 carries a 75-hp engine against 50 hp on the RM Yachts RM 1180 Fin keel Fin keel 2019. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the RM Yachts RM 1360 Fin keel Fin keel 2013 carries 159 gallons versus 79 gallons on the RM Yachts RM 1180 Fin keel Fin keel 2019 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.