Rinker 226 Captiva Bowrider 2006 boat specs
Rinker
Rinker 226 Captiva Bowrider 2006
2006
View full specs →
VS
Rinker Captiva 216 BR 2012 boat specs
Rinker
Rinker Captiva 216 BR 2012
2012
View full specs →

Rinker 226 Captiva Bowrider 2006 vs Rinker Captiva 216 BR 2012 — Same Brand, Different Boat

The Rinker 226 Captiva Bowrider 2006 vs Rinker Captiva 216 BR 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Rinker 226 Captiva Bowrider 2006 at 23,0 ft versus Rinker Captiva 216 BR 2012 at 21,0 ft. Weight tells a clearer story for trailering families: the Rinker Captiva 216 BR 2012 tips the scales at 3 935 lbs — 3 570 lbs less than the Rinker 226 Captiva Bowrider 2006 at 365 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Rinker Captiva 216 BR 2012 tops out at 300 hp. Engine specs for the Rinker 226 Captiva Bowrider 2006 aren't listed — confirm with a dealer before selecting an outboard.Both carry nearly identical fuel loads — 42 gal and 42 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Rinker 226 Captiva Bowrider 2006 is rated for 11 passengers, while the Rinker Captiva 216 BR 2012 caps at 1. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Rinker 226 Captiva Bowrider 2006 could be the deciding factor.

Bottom line: Choose the Rinker 226 Captiva Bowrider 2006 if your priority is putting more people on the water — it handles 11 passengers and at 23,0 ft it has the deck room to back that rating up comfortably. The Rinker Captiva 216 BR 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 1 that costs less to run day-to-day.
General Boat Info
MakeRinker
MakeRinker
Model226 Captiva Bowrider
ModelCaptiva 216 BR
Model Year2006
Model Year2012
Measurements / Dimensions
Beam8 ft. 6 in. (2.59 m)
Beam8 ft
Beam - Meters2.59
Beam - Meters2.44
Beam - Inches102
Beam - Inches96
Bridge clearance - Detail5 ft. 0 in. (1.52 m)
Bridge clearance - Detailnot available
Bridge clearance - Meters1.52
Bridge clearance - Metersnot available
Bridge clearance - Inches6
Bridge clearance - Inchesnot available
Deadrise20℃
Deadrisenot available
Draft [drive up] - Detail22 in. (55 cm)
Draft [drive up] - Detail34 in
Draft [drive up] meters0.56
Draft [drive up] meters0.86
Draft [drive up] inches22
Draft [drive up] inches34
Draft [max] - Detail36 in. (91 cm)
Draft [max] - Detailnot available
Draft [max] - Meters0.91
Draft [max] - Metersnot available
Draft [max] - Inches36
Draft [max] - Inchesnot available
Weight - Detail3,650 lbs. (1,656.6 kg)
Weight - Detail3,935 lbs. dry 4,195 lbs. wet
Weight - kg1655.61
Weight - kg1784.88
Weight - lbs.365
Weight - lbs.3935
Length - Feet23
Length - Feet21
Length - Inches6
Length - Inchesnot available
Length overall - Detail23 ft. 6 in. (7.16 m)
Length overall - Detail21 ft
Length overall - Meters7.16
Length overall - Meters6.4
Length overall - Inches282
Length overall - Inches252
Engine and Drivetrain
Fuel tank capacity - Detail42 gal
Fuel tank capacity - Detail42 gal
Fuel tank capacity - Liters158.99
Fuel tank capacity - Liters158.99
Fuel tank capacity - Gal42
Fuel tank capacity - Gal42
Drive typeI/O
Drive typeInboard
Fuel typenot available
Fuel typeGas
Engine maxnot available
Engine max300 hp
Operational Info
Maximum people11
Maximum people1
Body / Hull
Hull materialnot available
Hull materialFiberglass
Hull typenot available
Hull typeDeep Vee

Rinker 226 Captiva Bowrider 2006 vs Rinker Captiva 216 BR 2012 — Common Questions

Which is the larger boat — the Rinker 226 Captiva Bowrider 2006 or the Rinker Captiva 216 BR 2012?
The Rinker 226 Captiva Bowrider 2006 is the longer of the two at 23,0 feet overall. The Rinker Captiva 216 BR 2012 comes in at 21,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Rinker 226 Captiva Bowrider 2006 or the Rinker Captiva 216 BR 2012?
For trailering, the Rinker 226 Captiva Bowrider 2006 has the edge at 365 lbs dry weight versus 3 935 lbs for the Rinker Captiva 216 BR 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Rinker Captiva 216 BR 2012 has a documented max rating of 300 hp. Engine specifications for the Rinker 226 Captiva Bowrider 2006 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Rinker 226 Captiva Bowrider 2006 is Coast Guard rated for 11 passengers, while the Rinker Captiva 216 BR 2012 is certified for 1. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Rinker 226 Captiva Bowrider 2006 measures 102" wide, compared to 96" for the Rinker Captiva 216 BR 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Rinker 226 Captiva Bowrider 2006 and Rinker Captiva 216 BR 2012?
Both boats carry similar fuel loads — 42 gallons and 42 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Rinker 226 Captiva Bowrider 2006 and Rinker Captiva 216 BR 2012 from the same manufacturer?
Yes — both the Rinker 226 Captiva Bowrider 2006 and the Rinker Captiva 216 BR 2012 are built by Rinker. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.