Raider Sea-Raider 28 Cuddy 2010 boat specs
Raider
Raider Sea-Raider 28 Cuddy 2010
2010
View full specs →
VS
Raider Sea-Raider 28/96 Cuddy 2013 boat specs
Raider
Raider Sea-Raider 28/96 Cuddy 2013
2013
View full specs →

Raider Sea-Raider 28 Cuddy 2010 vs Raider Sea-Raider 28/96 Cuddy 2013 — A Close Look at Two Deep Vees

When two boats share the same hull type — in this case both the Raider Sea-Raider 28 Cuddy 2010 and the Raider Sea-Raider 28/96 Cuddy 2013 are deep vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Raider Sea-Raider 28 Cuddy 2010 at 28,0 ft versus Raider Sea-Raider 28/96 Cuddy 2013 at 28,0 ft. At 51 lbs and 51 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 450 hp for the Raider Sea-Raider 28 Cuddy 2010 and 450 hp for the Raider Sea-Raider 28/96 Cuddy 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 124 gal and 124 gal — so range won't be a tiebreaker here.

Both boats are rated for 9 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Raider Sea-Raider 28 Cuddy 2010 and Raider Sea-Raider 28/96 Cuddy 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeRaider
MakeRaider
ModelSea-Raider 28 Cuddy
ModelSea-Raider 28/96 Cuddy
Model Year201
Model Year2013
Measurements / Dimensions
Beam110 in
Beam110 in
Beam - Meters2.79
Beam - Meters2.79
Beam - Inches11
Beam - Inches11
Deadrise18℃
Deadrise18℃
Depth - Detail31 in
Depth - Detail31 in
Depth - Centimeters78.74
Depth - Centimeters78.74
Depth - Inches31
Depth - Inches31
Weight - Detail5,100 lbs
Weight - Detail5,100 lbs
Weight - kg2313.32
Weight - kg2313.32
Weight - lbs.51
Weight - lbs.51
Height - DetailSide: 38 in
Height - DetailSide: 38 in
Height - Meters0.97
Height - Meters0.97
Height - Inches38
Height - Inches38
Length - Feet28
Length - Feet28
Length overall - Detail28 ft. 0 in
Length overall - Detail28 ft
Length overall - Meters8.53
Length overall - Meters8.53
Length overall - Inches336
Length overall - Inches336
Width [transom] - Detailnot available
Width [transom] - DetailBottom: 96 in
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeDeep Vee
Hull typeDeep Vee
Hull thicknessnot available
Hull thicknessBottom: 0.250 in Side: 0.160 in
Engine and Drivetrain
Fuel tank capacity - Detail124 gal
Fuel tank capacity - Detail124 gal
Fuel tank capacity - Liters469.39
Fuel tank capacity - Liters469.39
Fuel tank capacity - Gal124
Fuel tank capacity - Gal124
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine maxProp: 450 hp
Engine maxProp: 450 hp
Operational Info
Maximum capacity3,500 lbs
Maximum capacity3,500 lbs
Maximum people9 or 1,500 lbs
Maximum people9 or 1,500 lbs

Raider Sea-Raider 28 Cuddy 2010 vs Raider Sea-Raider 28/96 Cuddy 2013 — Common Questions

Which is the larger boat — the Raider Sea-Raider 28 Cuddy 2010 or the Raider Sea-Raider 28/96 Cuddy 2013?
The Raider Sea-Raider 28/96 Cuddy 2013 is the longer of the two at 28,0 feet overall. The Raider Sea-Raider 28 Cuddy 2010 comes in at 28,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Raider Sea-Raider 28 Cuddy 2010 or the Raider Sea-Raider 28/96 Cuddy 2013?
For trailering, the Raider Sea-Raider 28/96 Cuddy 2013 has the edge at 51 lbs dry weight versus 51 lbs for the Raider Sea-Raider 28 Cuddy 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Raider Sea-Raider 28 Cuddy 2010 is Coast Guard rated for 9 passengers, while the Raider Sea-Raider 28/96 Cuddy 2013 is certified for 9. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Raider Sea-Raider 28 Cuddy 2010 and Raider Sea-Raider 28/96 Cuddy 2013 share an 110 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
How do the fuel tanks compare on the Raider Sea-Raider 28 Cuddy 2010 and Raider Sea-Raider 28/96 Cuddy 2013?
Both boats carry similar fuel loads — 124 gallons and 124 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Raider Sea-Raider 28 Cuddy 2010 and Raider Sea-Raider 28/96 Cuddy 2013 from the same manufacturer?
Yes — both the Raider Sea-Raider 28 Cuddy 2010 and the Raider Sea-Raider 28/96 Cuddy 2013 are built by Raider. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.