When two boats share the same hull type — in this case both the Premier Boats Elite 250 2013 and the Premier Boats S-Series 235 2010 are pontoon designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Premier Boats Elite 250 2013 at 25,4 ft versus Premier Boats S-Series 235 2010 at 24,0 ft. Weight tells a clearer story for trailering families: the Premier Boats Elite 250 2013 tips the scales at 415 lbs — 386 lbs more than the Premier Boats S-Series 235 2010 at 29 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Premier Boats S-Series 235 2010 tops out at 225 hp. Engine specs for the Premier Boats Elite 250 2013 aren't listed — confirm with a dealer before selecting an outboard.Fuel capacity breaks the other way: the Premier Boats Elite 250 2013 carries 47 gallons versus 29 gallons in the Premier Boats S-Series 235 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Premier Boats Elite 250 2013 is rated for 16 passengers, while the Premier Boats S-Series 235 2010 caps at 15. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Premier Boats Elite 250 2013 could be the deciding factor.

One place where both boats are genuinely identical is tube construction: both run 3 aluminum tubes at 25" diameter. That shared spec means stability and buoyancy characteristics are closely matched — the ride difference you'll feel between them comes primarily from deck length, weight distribution, and motor choice.