Parti Kraft Ensign PK1980 F 2006 boat specs
Parti Kraft
Parti Kraft Ensign PK1980 F 2006
2006
View full specs →
VS
Parti Kraft PK 1780 F 2010 boat specs
Parti Kraft
Parti Kraft PK 1780 F 2010
2010
View full specs →

Parti Kraft Ensign PK1980 F 2006 vs Parti Kraft PK 1780 F 2010 — Same Brand, Different Boat

The Parti Kraft Ensign PK1980 F 2006 vs Parti Kraft PK 1780 F 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Parti Kraft Ensign PK1980 F 2006 at 19,0 ft versus Parti Kraft PK 1780 F 2010 at 17,2 ft. At 1 386 lbs and 1 303 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 75 hp for the Parti Kraft Ensign PK1980 F 2006 and 60 hp for the Parti Kraft PK 1780 F 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 24 gal and 24 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Parti Kraft Ensign PK1980 F 2006 is rated for 9 passengers, while the Parti Kraft PK 1780 F 2010 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Parti Kraft Ensign PK1980 F 2006 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Parti Kraft Ensign PK1980 F 2006 comes in at 19 lbs per hp versus 22 lbs per hp for the Parti Kraft PK 1780 F 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

The Parti Kraft Ensign PK1980 F 2006 is an inflatable design — lighter, easier to store, and quicker to launch from a beach or dock without a slipway. The Parti Kraft PK 1780 F 2010 is a rigid hull, which typically offers a more confident ride in chop and easier maintenance over the long term.

Bottom line: Choose the Parti Kraft Ensign PK1980 F 2006 if your priority is putting more people on the water — it handles 9 passengers and at 19,0 ft it has the deck room to back that rating up comfortably. The Parti Kraft PK 1780 F 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 8 that costs less to run day-to-day.
General Boat Info
MakeParti Kraft
MakeParti Kraft
ModelEnsign PK1980 F
ModelPK 1780 F
Model Year2006
Model Year201
Measurements / Dimensions
Beam8 ft. 0 in
Beamnot available
Beam - Meters2.44
Beam - Metersnot available
Beam - Inches96
Beam - Inchesnot available
Weight - Detail1,386 lbs
Weight - Detail1,303 lbs
Weight - kg628.68
Weight - kg591.03
Weight - lbs.1386
Weight - lbs.1303
Length - Feet19
Length - Feet17.17
Length overall - Detail19 ft. 0 in
Length overall - Detail17 ft. 2 in
Length overall - Meters5.79
Length overall - Meters5.23
Length overall - Inches228
Length overall - Inches206
Width [transom] - Detailnot available
Width [transom] - Detail8 ft. 0 in
Pontoon and Inflatable Specific
Tube diameter23 in
Tube diameter23 in
Number of tubes2
Number of tubesnot available
Engine and Drivetrain
Fuel tank capacity - Detail24 gal
Fuel tank capacity - Detail24 gal
Fuel tank capacity - Liters90.85
Fuel tank capacity - Liters90.85
Fuel tank capacity - Gal24
Fuel tank capacity - Gal24
Drive typeOutboard
Drive typeOutboard
Engine max75 hp
Engine max60 hp
Fuel typenot available
Fuel typeGas
Operational Info
Maximum capacity1,233 lbs
Maximum capacitynot available
Maximum people9
Maximum people8 / 1,077 lbs
Body / Hull
Hull materialnot available
Hull materialAluminum
Hull typenot available
Hull typePontoon

Parti Kraft Ensign PK1980 F 2006 vs Parti Kraft PK 1780 F 2010 — Common Questions

Which is the larger boat — the Parti Kraft Ensign PK1980 F 2006 or the Parti Kraft PK 1780 F 2010?
The Parti Kraft Ensign PK1980 F 2006 is the longer of the two at 19,0 feet overall. The Parti Kraft PK 1780 F 2010 comes in at 17,2 feet, making it roughly 1,8 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Parti Kraft Ensign PK1980 F 2006 or the Parti Kraft PK 1780 F 2010?
For trailering, the Parti Kraft PK 1780 F 2010 has the edge at 1 303 lbs dry weight versus 1 386 lbs for the Parti Kraft Ensign PK1980 F 2006. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Parti Kraft Ensign PK1980 F 2006 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Parti Kraft PK 1780 F 2010 tops out at 60 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Parti Kraft Ensign PK1980 F 2006 is Coast Guard rated for 9 passengers, while the Parti Kraft PK 1780 F 2010 is certified for 8. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
How do the fuel tanks compare on the Parti Kraft Ensign PK1980 F 2006 and Parti Kraft PK 1780 F 2010?
Both boats carry similar fuel loads — 24 gallons and 24 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Parti Kraft Ensign PK1980 F 2006 and Parti Kraft PK 1780 F 2010 from the same manufacturer?
Yes — both the Parti Kraft Ensign PK1980 F 2006 and the Parti Kraft PK 1780 F 2010 are built by Parti Kraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.