The Nautor Swan Swan 47 Fin keel Fin keel 1974 vs Nautor Swan Swan 60 FD 2009 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Nautor Swan Swan 60 FD 2009 measures 61,1 feet overall (2009), giving it roughly 14,0 additional feet of deck space compared to the Nautor Swan Swan 47 Fin keel Fin keel 1974 at 47,1 feet (1974). Weight tells a clearer story for trailering families: the Nautor Swan Swan 60 FD 2009 tips the scales at 41 226 lbs — 8 818 lbs less than the Nautor Swan Swan 47 Fin keel Fin keel 1974 at 32 408 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 110 hp, the Nautor Swan Swan 60 FD 2009 has a 49-hp advantage over the Nautor Swan Swan 47 Fin keel Fin keel 1974's 61-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Nautor Swan Swan 60 FD 2009 carries 132 gallons versus 53 gallons in the Nautor Swan Swan 47 Fin keel Fin keel 1974. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Nautor Swan Swan 60 FD 2009 is rated for 18 passengers, while the Nautor Swan Swan 47 Fin keel Fin keel 1974 caps at 14. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Nautor Swan Swan 60 FD 2009 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Nautor Swan Swan 60 FD 2009 displaces 41 226 lbs — a 8 818-lb difference over the Nautor Swan Swan 47 Fin keel Fin keel 1974 at 32 408 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Nautor Swan Swan 60 FD 2009 draws 11,1 ft, compared to 7,7 ft for the Nautor Swan Swan 47 Fin keel Fin keel 1974. That 3,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Nautor Swan Swan 47 Fin keel Fin keel 1974 uses Sloop rigging. Helm style differs too: the Nautor Swan Swan 47 Fin keel Fin keel 1974 uses a 1 wheel versus a 2 wheels on the Nautor Swan Swan 60 FD 2009. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Nautor Swan Swan 60 FD 2009 carries a 110-hp engine against 61 hp on the Nautor Swan Swan 47 Fin keel Fin keel 1974. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 9,9 knots for the Nautor Swan Swan 60 FD 2009 and 8,1 knots for the Nautor Swan Swan 47 Fin keel Fin keel 1974. For extended cruising, water capacity matters: the Nautor Swan Swan 60 FD 2009 carries 106 gallons versus 93 gallons on the Nautor Swan Swan 47 Fin keel Fin keel 1974 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.