Nautor Swan Swan 115 FD Standard Standard 2015 vs Nautor Swan Swan 115 S Standard Standard 2015 - Boat Spec Comparison

Q: Which is the larger boat — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

The Nautor Swan Swan 115 S Standard Standard 2015 is the longer of the two at 115,6 feet overall. The Nautor Swan Swan 115 FD Standard Standard 2015 comes in at 115,6 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which is easier to trailer — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

For trailering, the Nautor Swan Swan 115 FD Standard Standard 2015 has the edge at 243 831 lbs dry weight versus 249 976 lbs for the Nautor Swan Swan 115 S Standard Standard 2015. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: How many people can each boat hold?

The Nautor Swan Swan 115 FD Standard Standard 2015 is Coast Guard rated for 35 passengers, while the Nautor Swan Swan 115 S Standard Standard 2015 is certified for 35. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat has the deeper draft — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

The Nautor Swan Swan 115 S Standard Standard 2015 has the deeper draft at 15,5 ft, versus 15,5 ft for the Nautor Swan Swan 115 FD Standard Standard 2015. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.

Q: Which is the faster sailboat — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

Based on rated hull speed, the Nautor Swan Swan 115 S Standard Standard 2015 has an edge at 13,9 knots versus 13,9 knots for the Nautor Swan Swan 115 FD Standard Standard 2015. Keep in mind that actual sailing speed depends heavily on wind conditions, sail trim, bottom condition, and skipper experience — hull speed is a theoretical maximum, not a guarantee.

Q: Do these boats require an oversize trailer permit to tow on US highways?

Both the Nautor Swan Swan 115 FD Standard Standard 2015 and Nautor Swan Swan 115 S Standard Standard 2015 share an 26.70 ft beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Q: How do the fuel tanks compare on the Nautor Swan Swan 115 FD Standard Standard 2015 and Nautor Swan Swan 115 S Standard Standard 2015?

Both boats carry similar fuel loads — 1 453 gallons and 1 453 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.

Q: Are the Nautor Swan Swan 115 FD Standard Standard 2015 and Nautor Swan Swan 115 S Standard Standard 2015 from the same manufacturer?

Yes — both the Nautor Swan Swan 115 FD Standard Standard 2015 and the Nautor Swan Swan 115 S Standard Standard 2015 are built by Nautor Swan. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Nautor Swan Swan 115 FD Standard Standard 2015 vs Nautor Swan Swan 115 S Standard Standard 2015

Nautor Swan

Nautor Swan Swan 115 FD Standard Standard 2015

2015

View full specs →

Nautor Swan

Nautor Swan Swan 115 S Standard Standard 2015

2015

View full specs →

Detailed Evaluation & Buyer Recommendation

Nautor Swan Swan 115 FD Standard Standard 2015 vs Nautor Swan Swan 115 S Standard Standard 2015 — Same Brand, Different Boat

The Nautor Swan Swan 115 FD Standard Standard 2015 vs Nautor Swan Swan 115 S Standard Standard 2015 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Nautor Swan Swan 115 FD Standard Standard 2015 at 115,6 ft versus Nautor Swan Swan 115 S Standard Standard 2015 at 115,6 ft. Weight tells a clearer story for trailering families: the Nautor Swan Swan 115 S Standard Standard 2015 tips the scales at 249 976 lbs — 6 145 lbs less than the Nautor Swan Swan 115 FD Standard Standard 2015 at 243 831 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats are rated for 35 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Displacement is where these two sailboats genuinely part ways. The Nautor Swan Swan 115 S Standard Standard 2015 displaces 249 976 lbs — a 6 145-lb difference over the Nautor Swan Swan 115 FD Standard Standard 2015 at 243 831 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 15,5 ft and 15,5 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Nautor Swan Swan 115 FD Standard Standard 2015 uses Sloop rigging.

Hull speed is rated at 13,9 knots for the Nautor Swan Swan 115 S Standard Standard 2015 and 13,9 knots for the Nautor Swan Swan 115 FD Standard Standard 2015.

Bottom line: The Nautor Swan Swan 115 S Standard Standard 2015 is the offshore and bluewater choice — at 249 976 lbs displacement and 116 ft it has the load capacity, range, and seakeeping for extended passages. The Nautor Swan Swan 115 FD Standard Standard 2015 at 243 831 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.

Measurements / Dimensions

Length overall - Detail115.60 ft

Length - Feet115.6

Length overall - Meters35.23

Length overall - Inches1387

Beam26.70 ft

Beam - Meters8.14

Beam - Inches320

Draft [max] - Detail15.50 ft

Draft [max] - Meters4.72

Draft [max] - Inches186

Displacement243831.00 lbs

Displacement249976.00 lbs

Body / Hull

Rudder2 spade rudders

Helm2 wheels

Engine and Drivetrain

Fuel tank capacity - Gal1452.9

Fuel tank capacity - Liters5499.82

Engine 2 Horsepower450 hp

Engine 2 Drive Typeinboard

Performance

Maximum speed13.91

Maximum speed measureknots

Operational Info

Water capacity792.5

Holding tank capacity - Gal369.8

Holding tank capacity - Liters1399.84

RiggingSloop

Mast ConfigurationKeel stepped mast

Boat typeSail

Nautor Swan Swan 115 FD Standard Standard 2015 vs Nautor Swan Swan 115 S Standard Standard 2015 — Common Questions

Which is the larger boat — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

The Nautor Swan Swan 115 S Standard Standard 2015 is the longer of the two at 115,6 feet overall. The Nautor Swan Swan 115 FD Standard Standard 2015 comes in at 115,6 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which is easier to trailer — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

For trailering, the Nautor Swan Swan 115 FD Standard Standard 2015 has the edge at 243 831 lbs dry weight versus 249 976 lbs for the Nautor Swan Swan 115 S Standard Standard 2015. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

How many people can each boat hold?

The Nautor Swan Swan 115 FD Standard Standard 2015 is Coast Guard rated for 35 passengers, while the Nautor Swan Swan 115 S Standard Standard 2015 is certified for 35. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat has the deeper draft — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

The Nautor Swan Swan 115 S Standard Standard 2015 has the deeper draft at 15,5 ft, versus 15,5 ft for the Nautor Swan Swan 115 FD Standard Standard 2015. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.

Is the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015 better suited for offshore sailing?

For offshore work, displacement and construction are the primary indicators. The Nautor Swan Swan 115 S Standard Standard 2015 at 249 976 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Nautor Swan Swan 115 FD Standard Standard 2015 at 243 831 lbs will typically be livelier and more responsive in lighter conditions.

Which is the faster sailboat — the Nautor Swan Swan 115 FD Standard Standard 2015 or the Nautor Swan Swan 115 S Standard Standard 2015?

Based on rated hull speed, the Nautor Swan Swan 115 S Standard Standard 2015 has an edge at 13,9 knots versus 13,9 knots for the Nautor Swan Swan 115 FD Standard Standard 2015. Keep in mind that actual sailing speed depends heavily on wind conditions, sail trim, bottom condition, and skipper experience — hull speed is a theoretical maximum, not a guarantee.

Do these boats require an oversize trailer permit to tow on US highways?

Both the Nautor Swan Swan 115 FD Standard Standard 2015 and Nautor Swan Swan 115 S Standard Standard 2015 share an 26.70 ft beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

How do the fuel tanks compare on the Nautor Swan Swan 115 FD Standard Standard 2015 and Nautor Swan Swan 115 S Standard Standard 2015?

Both boats carry similar fuel loads — 1 453 gallons and 1 453 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.

Are the Nautor Swan Swan 115 FD Standard Standard 2015 and Nautor Swan Swan 115 S Standard Standard 2015 from the same manufacturer?

Yes — both the Nautor Swan Swan 115 FD Standard Standard 2015 and the Nautor Swan Swan 115 S Standard Standard 2015 are built by Nautor Swan. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Nautor Swan Swan 115 FD Standard Standard 2015 full specs ← Nautor Swan Swan 115 S Standard Standard 2015 full specs