The Nautor Swan NYYC 48 Fin keel Fin keel 1974 vs Nautor Swan Swan 36 1967 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Nautor Swan NYYC 48 Fin keel Fin keel 1974 measures 47,1 feet overall (1974), giving it roughly 12,0 additional feet of deck space compared to the Nautor Swan Swan 36 1967 at 35,1 feet (1967). Weight tells a clearer story for trailering families: the Nautor Swan NYYC 48 Fin keel Fin keel 1974 tips the scales at 32 408 lbs — 16 976 lbs more than the Nautor Swan Swan 36 1967 at 15 432 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Nautor Swan NYYC 48 Fin keel Fin keel 1974 carries a rated maximum of 61 hp. Engine data for the Nautor Swan Swan 36 1967 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Nautor Swan NYYC 48 Fin keel Fin keel 1974 carries 53 gallons versus 13 gallons in the Nautor Swan Swan 36 1967. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Nautor Swan NYYC 48 Fin keel Fin keel 1974 is rated for 14 passengers, while the Nautor Swan Swan 36 1967 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Nautor Swan NYYC 48 Fin keel Fin keel 1974 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Nautor Swan NYYC 48 Fin keel Fin keel 1974 displaces 32 408 lbs — a 16 976-lb difference over the Nautor Swan Swan 36 1967 at 15 432 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Nautor Swan NYYC 48 Fin keel Fin keel 1974 draws 7,7 ft, compared to 6,2 ft for the Nautor Swan Swan 36 1967. That 1,5-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Nautor Swan NYYC 48 Fin keel Fin keel 1974 uses Sloop rigging. Helm style differs too: the Nautor Swan NYYC 48 Fin keel Fin keel 1974 uses a 1 wheel versus a 1 tiller on the Nautor Swan Swan 36 1967. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. The Nautor Swan NYYC 48 Fin keel Fin keel 1974 has a documented auxiliary engine of 61 hp.

Hull speed is rated at 8,1 knots for the Nautor Swan NYYC 48 Fin keel Fin keel 1974 and 6,8 knots for the Nautor Swan Swan 36 1967. For extended cruising, water capacity matters: the Nautor Swan NYYC 48 Fin keel Fin keel 1974 carries 93 gallons versus 45 gallons on the Nautor Swan Swan 36 1967 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.