The Nautor Swan NYYC 48 Fin keel Fin keel 1974 vs Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 measures 107,8 feet overall (2015), giving it roughly 60,7 additional feet of deck space compared to the Nautor Swan NYYC 48 Fin keel Fin keel 1974 at 47,1 feet (1974). Weight tells a clearer story for trailering families: the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 tips the scales at 249 976 lbs — 217 568 lbs less than the Nautor Swan NYYC 48 Fin keel Fin keel 1974 at 32 408 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Nautor Swan NYYC 48 Fin keel Fin keel 1974 carries a rated maximum of 61 hp. Engine data for the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 carries 1 453 gallons versus 53 gallons in the Nautor Swan NYYC 48 Fin keel Fin keel 1974. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 is rated for 32 passengers, while the Nautor Swan NYYC 48 Fin keel Fin keel 1974 caps at 14. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 displaces 249 976 lbs — a 217 568-lb difference over the Nautor Swan NYYC 48 Fin keel Fin keel 1974 at 32 408 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 draws 18,1 ft, compared to 7,7 ft for the Nautor Swan NYYC 48 Fin keel Fin keel 1974. That 10,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Nautor Swan NYYC 48 Fin keel Fin keel 1974 uses Sloop rigging. Helm style differs too: the Nautor Swan NYYC 48 Fin keel Fin keel 1974 uses a 1 wheel versus a 2 wheels on the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. The Nautor Swan NYYC 48 Fin keel Fin keel 1974 has a documented auxiliary engine of 61 hp.

Hull speed is rated at 13,9 knots for the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 and 8,1 knots for the Nautor Swan NYYC 48 Fin keel Fin keel 1974. For extended cruising, water capacity matters: the Nautor Swan Swan 115 S Lifting keel Lifting keel 2015 carries 793 gallons versus 93 gallons on the Nautor Swan NYYC 48 Fin keel Fin keel 1974 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.