The Nautor Swan Club Swan 42 2006 vs Nautor Swan Swan 42 Standard Standard 1980 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — Nautor Swan Club Swan 42 2006 at 42,7 ft versus Nautor Swan Swan 42 Standard Standard 1980 at 42,0 ft. Weight tells a clearer story for trailering families: the Nautor Swan Swan 42 Standard Standard 1980 tips the scales at 20 944 lbs — 4 960 lbs less than the Nautor Swan Club Swan 42 2006 at 15 984 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling — 39 hp for the Nautor Swan Club Swan 42 2006 and 40 hp for the Nautor Swan Swan 42 Standard Standard 1980. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Nautor Swan Swan 42 Standard Standard 1980 carries 42 gallons versus 37 gallons in the Nautor Swan Club Swan 42 2006. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Nautor Swan Club Swan 42 2006 is rated for 13 passengers, while the Nautor Swan Swan 42 Standard Standard 1980 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Nautor Swan Club Swan 42 2006 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Nautor Swan Swan 42 Standard Standard 1980 displaces 20 944 lbs — a 4 960-lb difference over the Nautor Swan Club Swan 42 2006 at 15 984 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Both boats draw a similar depth — 8,1 ft and 7,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The Nautor Swan Club Swan 42 2006 uses Sloop rigging. Helm style differs too: the Nautor Swan Club Swan 42 2006 uses a 2 wheels versus a 1 wheel on the Nautor Swan Swan 42 Standard Standard 1980. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones.
Hull speed is rated at 8,4 knots for the Nautor Swan Club Swan 42 2006 and 7,8 knots for the Nautor Swan Swan 42 Standard Standard 1980.
Bottom line: The Nautor Swan Swan 42 Standard Standard 1980 is the offshore and bluewater choice — at 20 944 lbs displacement and 42 ft it has the load capacity, range, and seakeeping for extended passages. The Nautor Swan Club Swan 42 2006 at 15 984 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.