When two boats share the same hull type — in this case both the MirroCraft 3672 (16 ft. Laker) 2010 and the MirroCraft 4602 (12 ft. Resorter) 2012 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Size is the most obvious dividing line here. The MirroCraft 3672 (16 ft. Laker) 2010 measures 16,2 feet overall (2010), giving it roughly 4,0 additional feet of deck space compared to the MirroCraft 4602 (12 ft. Resorter) 2012 at 12,2 feet (2012). Weight tells a clearer story for trailering families: the MirroCraft 4602 (12 ft. Resorter) 2012 tips the scales at 145 lbs — 109 lbs less than the MirroCraft 3672 (16 ft. Laker) 2010 at 36 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 40 hp, the MirroCraft 3672 (16 ft. Laker) 2010 has a 25-hp advantage over the MirroCraft 4602 (12 ft. Resorter) 2012's 15-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The MirroCraft 3672 (16 ft. Laker) 2010 is rated for 5 passengers, while the MirroCraft 4602 (12 ft. Resorter) 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the MirroCraft 3672 (16 ft. Laker) 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The MirroCraft 3672 (16 ft. Laker) 2010 comes in at 1 lbs per hp versus 10 lbs per hp for the MirroCraft 4602 (12 ft. Resorter) 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.