Matching a deep vee MirroCraft 1753 2010 against a modified vee MirroCraft 3673 (16 ft. Laker II) 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department — MirroCraft 1753 2010 at 16,8 ft versus MirroCraft 3673 (16 ft. Laker II) 2010 at 16,2 ft. Weight tells a clearer story for trailering families: the MirroCraft 1753 2010 tips the scales at 124 lbs — 120 lbs more than the MirroCraft 3673 (16 ft. Laker II) 2010 at 4 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 140 hp, the MirroCraft 1753 2010 has a 100-hp advantage over the MirroCraft 3673 (16 ft. Laker II) 2010's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The MirroCraft 3673 (16 ft. Laker II) 2010 comes in at 0 lbs per hp versus 1 lbs per hp for the MirroCraft 1753 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the MirroCraft 1753 2010 and its 140-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the MirroCraft 3673 (16 ft. Laker II) 2010 with its 40-hp rating is the more economical daily driver.