Both the MirroCraft 1686 2012 and the MirroCraft 1750 2010 are deep-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
On paper these two are close siblings in the size department - MirroCraft 1686 2012 at 16,8 ft versus MirroCraft 1750 2010 at 16,8 ft. Weight tells a clearer story for trailering families: the MirroCraft 1750 2010 tips the scales at 1 050 lbs - 150 lbs less than the MirroCraft 1686 2012 at 900 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling - 60 hp for the MirroCraft 1686 2012 and 80 hp for the MirroCraft 1750 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The MirroCraft 1750 2010 comes in at 13 lbs per hp versus 15 lbs per hp for the MirroCraft 1686 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the MirroCraft 1750 2010 and its 80-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the MirroCraft 1686 2012 with its 60-hp rating is the more economical daily driver.