Mercury 430 Heavy Duty PVC 2011 boat specs
Mercury
Mercury 430 Heavy Duty PVC 2011
2011
View full specs →
VS
Mercury V-520/570 Series 2010 boat specs
Mercury
Mercury V-520/570 Series 2010
2010
View full specs →

Mercury 430 Heavy Duty PVC 2011 vs Mercury V-520/570 Series 2010 — A Close Look at Two Inflatable Rigids

When two boats share the same hull type — in this case both the Mercury 430 Heavy Duty PVC 2011 and the Mercury V-520/570 Series 2010 are inflatable rigid designs with plastic construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Mercury 430 Heavy Duty PVC 2011 at 14,1 ft versus Mercury V-520/570 Series 2010 at 17,0 ft. Weight tells a clearer story for trailering families: the Mercury V-520/570 Series 2010 tips the scales at 578 lbs — 324 lbs less than the Mercury 430 Heavy Duty PVC 2011 at 254 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 100 hp, the Mercury V-520/570 Series 2010 has a 70-hp advantage over the Mercury 430 Heavy Duty PVC 2011's 30-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Mercury V-520/570 Series 2010 is rated for 9 passengers, while the Mercury 430 Heavy Duty PVC 2011 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Mercury V-520/570 Series 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Mercury V-520/570 Series 2010 comes in at 6 lbs per hp versus 9 lbs per hp for the Mercury 430 Heavy Duty PVC 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Mercury V-520/570 Series 2010 if your priority is putting more people on the water — it handles 9 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Mercury 430 Heavy Duty PVC 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 8 that costs less to run day-to-day.
General Boat Info
MakeMercury
MakeMercury
Model430 Heavy Duty PVC
ModelV-520/570 Series
Model Year2011
Model Year201
Measurements / Dimensions
Weight - Detail254 lbs. (115 kg)
Weight - Detail578 lbs
Weight - kg115.21
Weight - kg262.18
Weight - lbs.254
Weight - lbs.578
Length - Feet14.08
Length - Feet17
Length overall - Detail14 ft. 1 in. (430 cm)
Length overall - Detail17 ft. 0 in
Length overall - Meters4.29
Length overall - Meters5.18
Length overall - Inches169
Length overall - Inches204
Beamnot available
Beam7 ft. 1 in. (216 cm)
Beam - Metersnot available
Beam - Meters2.16
Beam - Inchesnot available
Beam - Inches85
Body / Hull
Hull materialPlastic
Hull materialRigid inflatable
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max30 hp
Engine max100 hp
Operational Info
Maximum people8
Maximum people9
Maximum capacitynot available
Maximum capacity2,535 lbs. (1,150 kg)
Pontoon and Inflatable Specific
Tube diameternot available
Tube diameter19 in. (48 cm)

Mercury 430 Heavy Duty PVC 2011 vs Mercury V-520/570 Series 2010 — Common Questions

Which is the larger boat — the Mercury 430 Heavy Duty PVC 2011 or the Mercury V-520/570 Series 2010?
The Mercury V-520/570 Series 2010 is the longer of the two at 17,0 feet overall. The Mercury 430 Heavy Duty PVC 2011 comes in at 14,1 feet, making it roughly 2,9 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Mercury 430 Heavy Duty PVC 2011 or the Mercury V-520/570 Series 2010?
For trailering, the Mercury 430 Heavy Duty PVC 2011 has the edge at 254 lbs dry weight versus 578 lbs for the Mercury V-520/570 Series 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Mercury V-520/570 Series 2010 is rated to a maximum of 100 hp, giving it the larger power ceiling. The Mercury 430 Heavy Duty PVC 2011 tops out at 30 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Mercury 430 Heavy Duty PVC 2011 is Coast Guard rated for 8 passengers, while the Mercury V-520/570 Series 2010 is certified for 9. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Mercury V-520/570 Series 2010 has a better power-to-weight ratio at 6 lbs per hp compared to 9 lbs per hp for the Mercury 430 Heavy Duty PVC 2011. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Are the Mercury 430 Heavy Duty PVC 2011 and Mercury V-520/570 Series 2010 from the same manufacturer?
Yes — both the Mercury 430 Heavy Duty PVC 2011 and the Mercury V-520/570 Series 2010 are built by Mercury. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.