When two boats share the same hull type — in this case both the Manitou Pontoons 26 Encore SHP 2012 and the Manitou Pontoons 27 ft. Encore SES VP 2010 are pontoon designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Manitou Pontoons 26 Encore SHP 2012 at 26,8 ft versus Manitou Pontoons 27 ft. Encore SES VP 2010 at 28,3 ft. Weight tells a clearer story for trailering families: the Manitou Pontoons 26 Encore SHP 2012 tips the scales at 3 375 lbs — 3 049 lbs more than the Manitou Pontoons 27 ft. Encore SES VP 2010 at 326 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 300 hp, the Manitou Pontoons 26 Encore SHP 2012 has a 150-hp advantage over the Manitou Pontoons 27 ft. Encore SES VP 2010's 150-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Manitou Pontoons 26 Encore SHP 2012 carries 57 gallons versus 34 gallons in the Manitou Pontoons 27 ft. Encore SES VP 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 15 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

One place where both boats are genuinely identical is tube construction: both run 3 aluminum tubes at 23" diameter. That shared spec means stability and buoyancy characteristics are closely matched — the ride difference you'll feel between them comes primarily from deck length, weight distribution, and motor choice.