When two boats share the same hull type — in this case both the Manitou Pontoons 20 ft. Aurora VP 2010 and the Manitou Pontoons 22 Oasis SHP 2012 are pontoon designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Manitou Pontoons 20 ft. Aurora VP 2010 at 20,8 ft versus Manitou Pontoons 22 Oasis SHP 2012 at 22,8 ft. At 195 lbs and 261 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 250 hp, the Manitou Pontoons 22 Oasis SHP 2012 has a 100-hp advantage over the Manitou Pontoons 20 ft. Aurora VP 2010's 150-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Manitou Pontoons 22 Oasis SHP 2012 carries 57 gallons versus 2 gallons in the Manitou Pontoons 20 ft. Aurora VP 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Manitou Pontoons 22 Oasis SHP 2012 is rated for 13 passengers, while the Manitou Pontoons 20 ft. Aurora VP 2010 caps at 1. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Manitou Pontoons 22 Oasis SHP 2012 could be the deciding factor.

One place where both boats are genuinely identical is tube construction: both run 3 aluminum tubes at 23" diameter. That shared spec means stability and buoyancy characteristics are closely matched — the ride difference you'll feel between them comes primarily from deck length, weight distribution, and motor choice.