Lund A 12 Tiller 2008 boat specs
Lund
Lund A 12 Tiller 2008
2008
View full specs →
VS
Lund Mr. Pike 17  2004 boat specs
Lund
Lund Mr. Pike 17 2004
2004
View full specs →

Lund A 12 Tiller 2008 vs Lund Mr. Pike 17 2004: Same Brand, Different Boat

The Lund A 12 Tiller 2008 vs Lund Mr. Pike 17 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 140 hp, the Lund Mr. Pike 17 2004 has a 130-hp advantage over the Lund A 12 Tiller 2008's 10-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Lund Mr. Pike 17 2004 and its 140-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Lund A 12 Tiller 2008 with its 10-hp rating is the more economical daily driver.
General Boat Info
MakeLund
MakeLund
ModelA 12 Tiller
ModelMr. Pike 17
Model Year2008
Model Year2004
Measurements / Dimensions
Beam60 in.
Beam93 in.
Beam - Meters1.52
Beam - Meters2.36
Beam - Inches60
Beam - Inches93
Weight - Detail164 lbs.
Weight - Detail1,185 lbs.
Weight - kg74.39
Weight - kg537.51
Weight - lbs.164
Weight - lbs.1185
Height [transom]15 in.
Height [transom]20 in.
Length - Feet12
Length - Feetnot available
Length - Inches1
Length - Inchesnot available
Length overall - Detail12 ft. 1 in.
Length overall - Detail17 ft. 2 in.
Length overall - Meters3.68
Length overall - Meters5.23
Length overall - Inches145
Length overall - Inches206
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeModified Vee
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max10 hp
Engine max140 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail32 gal. Built-in Tank
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters121.13
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal32
Operational Info
Maximum peoplenot available
Maximum people3
Warranty Info
Warrantynot available
WarrantyLifetime Limited Warranty

Lund A 12 Tiller 2008 vs Lund Mr. Pike 17 2004 - Common Questions

Which is easier to trailer - the Lund A 12 Tiller 2008 or the Lund Mr. Pike 17 2004?
For trailering, the Lund A 12 Tiller 2008 has the edge at 164 lbs dry weight versus 1 185 lbs for the Lund Mr. Pike 17 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Lund Mr. Pike 17 2004 is rated to a maximum of 140 hp, giving it the larger power ceiling. The Lund A 12 Tiller 2008 tops out at 10 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Lund A 12 Tiller 2008 is Coast Guard rated for 3 passengers, while the Lund Mr. Pike 17 2004 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Lund Mr. Pike 17 2004 measures 93" wide, compared to 60" for the Lund A 12 Tiller 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Lund A 12 Tiller 2008 and Lund Mr. Pike 17 2004 from the same manufacturer?
Yes - both the Lund A 12 Tiller 2008 and the Lund Mr. Pike 17 2004 are built by Lund. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.